{
    "tag": 18556,
    "title": "Topobathymetric Lidar Survey of Breton and Gosier Islands, Louisiana, January 16 and 18, 2014 - Point-cloud Data",
    "pubdate": "20160325",
    "sername": null,
    "series_name": null,
    "issue": "doi:10.5066\/F70G3H6G",
    "publish": null,
    "publisher_name": null,
    "onlink": "https:\/\/cmgds.marine.usgs.gov\/catalog\/spcmsc\/Breton_Gosier_Islands_2014_LAZ_Metadata.faq.html",
    "format": null,
    "email": null,
    "descript": "This dataset contains binary point-cloud data, produced from remotely sensed, geographically referenced topobathymetric measurements collected by Photo Science, Inc., encompassing the Breton and Gosier Island, LA study areas. The original area of interest was buffered by 100 meters to ensure complete coverage, resulting in approximately 75 square miles of lidar data. The Breton Island Lidar project called for the planning, acquisition, processing, and derivative products of topobathymetric lidar data, collected at a nominal pulse spacing (NPS) of 0.5-0.45 meters (4-5 points\/square meter). Lidar acquisition was prioritized to coincide with the lowest tide possible. Water clarity was also assessed and deemed acceptable prior to acquisition flights. The data, in meters, are projected to UTM Zone 16 North and referenced horizontally to the NAD83 (2011) datum and vertically to the NAVD88 (GEOID12A) datum. The classified point-cloud data were delivered in LAS v1.2 format and the merged DEM was converted to a GeoTIFF file. Each LAS file contains data in a 1-kilometer by 1-kilometer tile named according to the US National Grid conventions. The final product was a LAZ file for Breton Island and another for Gosier Islands.",
    "lang": null,
    "journal": null,
    "pwid": null,
    "originator": [
        {
            "name": "U.S. Geological Survey",
            "role": "Author"
        }
    ],
    "index_term": [
        {
            "thcode": 2,
            "code": "2041",
            "name": "digital elevation models",
            "scope": "Gridded elevation, geographically referenced to the surface of the earth, as digital data"
        },
        {
            "thcode": 2,
            "code": "648",
            "name": "lidar",
            "scope": "Light detection and ranging, an airborne, spaceborne or ground-based laser-ranging technique commonly used for acquiring high-resolution topographic data."
        },
        {
            "thcode": 2,
            "code": "1176",
            "name": "topography",
            "scope": "Configuration of the land surface and sea floor."
        },
        {
            "thcode": 15,
            "code": "006",
            "name": "elevation",
            "scope": "Height above or below sea level, for example altitude, bathymetry, digital elevation models, slope, derived products, DEMs, TINs"
        },
        {
            "thcode": 23,
            "code": "22",
            "name": "Bathymetry and Elevation",
            "scope": "Includes measures of the height of a location above or below a reference surface. Bathymetry is the elevation of the Earth's surface beneath a body of water, especially the ocean, typically determined by measurements of depth from the water surface at mean lower low water. Distributions are topographic maps and bathymetric charts based on collected data and also include smoothed or gridded maps of bathymetry and elevation from observational data or other associated factors. Assessment data types include models of ecological value, economic value, or current rates of alterations due to erosion, accretion, climate change, and other stressors (for example, wetland habitat loss). Predictions are the results of models or projections of future distributions, values, or ecological impacts of bathymetry, including predicted changes due to natural and human forces such as erosion, deposition, sea-level rise, and dredging activities; predictions also include the results of scenario-based models of bathymetry changes under different management strategies."
        },
        {
            "thcode": 23,
            "code": "3",
            "name": "Distributions",
            "scope": "Locations or patterns of a feature of interest across space and (or) time. These data can include point data, lines, polygons, and temporal data at any scale relevant to CMSP and can be produced by observation, interpolation, or modeling. Distributions can also include maps or statistics of climatology, the environmental values that are expected to be observed at the present time."
        },
        {
            "thcode": 61,
            "code": "447",
            "name": "altimetry",
            "scope": "used for all instruments and techniques that determine altitude, either directly or remotely, including (but not limited to) pressure altimeters, radar altimeters, GPS, and LIDAR."
        },
        {
            "thcode": 61,
            "code": "429",
            "name": "topographic mapping",
            "scope": "used for traditional cartographic methods that document the distribution and elevation of geographic and hydrographic features (and usually cultural features and administrative boundaries)."
        }
    ],
    "place_term": [],
    "image": [],
    "fan": [
        "14CNT04"
    ]
}