|
Hydrodynamic and sediment transport tsunami models at the Salmon River estuary, Oregon
This portion of the USGS data release describes the Delft3D-FLOW model application for propagating simulated tsunamis from 15 hypothetical earthquake sources of the Cascadia Subduction Zone through a series of nested grids to modeling tsunami sediment transport in the Salmon River estuary, OR. Input files necessary to run the Delft3D-FLOW model are provided. The model application was constructed using Delft3D-FLOW. Zip files containing model setup data are provided for each of the nested hydrodynamic grids ... |
Info |
|
Spectral wave model input files
A stand-alone wave model application was constructed using the spectral wave model SWAN within the Delft3D4 (version 4.04.01) modeling system to simulate nearshore wave dynamics along the coast of the Columbia River littoral cell, Washington and Oregon. Nearshore wave dynamics are solved at hourly intervals on a series of nested grids with resolutions varying between 750 m for the largest grid to about 80 m for the two detailed grids that cover the Grays Harbor and Columbia River inlets. The provided model ... |
Info |
|
Modeled nearshore wave parameters
This portion of the USGS data release contains simulated nearshore wave parameters derived from a stand-alone spectral wave model of the Columbia River littoral cell, Washington and Oregon. The model output includes significant wave heights, peak wave periods, mean wave directions, and water depths for a series of 221 shore normal transects that extended from the coastline to the -15 m NAVD88 elevation (about 16.5 m average water depth). Data are provided at the seaward extent of each transect as well as at ... |
Info |