A one- and two-dimensional hydrodynamic model of the San Francisco Bay and Delta was constructed using the Delft3D Flexible Mesh Suite (Delft3D FM; Kernkamp and others, 2011; https://www.deltares.nl/en/software/delft3d-flexible-mesh-suite/) to simulate still water levels. Required model input files are provided to run the model for the time period from October 1, 2018, to April 30, 2019. This data release describes the construction and validation of the model application and provides input files suitable to ...

A nested spectral wave model (Simulating Waves WAves Nearshore [SWAN]; Booij and others, 1999) was deployed for the central Beaufort Sea coast of Alaska to simulate waves for the period from 1979 to 2019. Results in the form of spatial summary statistics, describing wave parameters, wind speed and sea-ice area cover for the intermediate grid (see Overview Image on main page of data release), are provided. Further information can be found in Nederhoff and others (2021).

Time series output from a spectral wave model (Simulating Waves WAves Nearshore [SWAN]; Booij and others 1999), implemented for the central Beaufort Sea coast of Alaska from 1979 to 2019, are provided. The variables include significant wave heights, mean wave periods, mean wave directions, wave steepness, and orbital velocities. Additionally, water depths, x (east-west) and y (north-south) components of the wind, and sea ice concentrations are provided. Further information can be found in Nederhoff and ...

The required grid and bathymetry files to run a nested spectral wave model (Simulating Waves WAves Nearshore [SWAN]; Booij and others, 1999) for the central Beaufort Sea coast of Alaska are provided. A three-level SWAN nesting grid with grid resolutions of 5000 meters, 1000 meters, and 200 meters for the overall, intermediate and detail grids, respectively (see included Browse Graphic) has been developed. For this purpose, available local bathymetry (Coastal Frontiers Corporation, 2014; Kasper and others, ...

Projected impacts by compound coastal flood hazards for future sea-level rise (SLR) and storm scenarios are shown for North Carolina and South Carolina. Accompanying uncertainty for each SLR and storm scenario, indicating total uncertainty from model processes and contributing datasets, are illustrated in maximum and minimum flood potential. As described by Nederhoff and others (2023), projections were made using a system of numerical models driven by output from Global Climate Models (GCMs) from the ...

Projected water depths from compound coastal flood hazards for future sea-level rise (SLR) and storm scenarios are shown for North Carolina and South Carolina. As described by Nederhoff and others (2023), projections were made using a system of numerical models driven by output from Global Climate Models (GCMs) from the Coupled Model Intercomparison Project Phase 6 (CMIP6) and a tropical cyclone database from U.S. Army Corp of Engineers. The resulting data are depths of projected flood hazards along the ...

Projected depths from compound coastal flood hazards for future sea-level rise (SLR) and storm scenarios are shown for the U.S. Atlantic coast for three states (Florida, Georgia, and Virginia). Projections were made using a system of numerical models driven by output from Global Climate Models (GCMs) from the Coupled Model Intercomparison Project Phase 6 (CMIP6) and a tropical cyclone database from U.S. Army Corp of Engineers. The resulting data are depths of projected flood hazards along the U.S. Atlantic ...

Projected impacts by compound coastal flood hazards for future sea-level rise (SLR) and storm scenarios are shown for the U.S. Atlantic coast for three states (Florida, Georgia, and southern Virginia). Accompanying uncertainty for each SLR and storm scenario, indicating total uncertainty from model processes and contributing datasets, are illustrated in maximum and minimum flood potential. As described by Nederhoff and others (2023), projections were made using a system of numerical models driven by output ...

This data set consists of physics-based Delft3D-Flexible Mesh hydrodynamic model input files that are used to simulate compound flood exposure of the lower Nooksack River and delta of western Washington State under existing and future conditions of anticipated climate and land-use change. The model enables assessment of the changing flood exposure associated with the cumulative impacts of expected sea-level rise, greater tidal inundation, more frequent storm surge effects, and higher winter stream floods ...

Computed flood depths associated with the combined influence of sea level position, tides, storm surge, and streamflow under existing conditions and projected future higher sea level and peak stream runoff are provided for the lower (Reach 1) of the Nooksack River and delta in Whatcom County, western Washington State. The flood-depth projection data are provided in a series of raster geotiff files. Flood-depth projections were computed using a system of numerical models that accounted for projected changes ...

This dataset presents alongshore wave setup timeseries for the North and South Carolina coastlines. Wave setup was modelled using parameterization for open coast sandy beaches as presented in Stockdon and others (2006). The parameterization relates onshore wave setup to offshore wave conditions and beach characteristics. Wave conditions were extracted at approximately the 10 m depth contour and reverse shoaled to the deep-water condition. These data were then matched to cross-shore transects spaced at ...

This dataset presents alongshore wave setup timeseries for the North and South Carolina coastlines. Wave setup was modelled using parameterization for open coast sandy beaches as presented in Stockdon and others (2006). The parameterization relates onshore wave setup to offshore wave conditions and beach characteristics. Wave conditions were extracted at approximately the 10 m depth contour and reverse shoaled to the deep-water condition. These data were then matched to cross-shore transects spaced at ...

A dataset of modeled nearshore water levels (WLs) was developed for the North and South Carolina coastlines. Water levels, defined for this dataset as the linear sum of tides and non-tidal residuals (NTR), were produced by Muis and others (2016) using a global tide and surge model (GTSM) forced by global atmospheric fields. Water level outputs were extracted from the global grid at approximately 20 km resolution along the southeast Atlantic coastline. These data were then statistically downscaled using a ...

A dataset of modeled nearshore water levels (WLs) was developed for the North and South Carolina coastlines. Water levels, defined for this dataset as the linear sum of tides and non-tidal residuals (NTR), were produced by Muis and others (2016) using a global tide and surge model (GTSM) forced by global atmospheric fields -. Water level outputs were extracted from the global grid at approximately 20 km resolution along the coastlines. These data were then statistically downscaled using a signal-specific ...

This dataset presents alongshore wave setup timeseries for three states (Virginia, Georgia, and Florida) along the U.S. Atlantic coast. Wave setup was modelled using parameterization for open coast sandy beaches as presented in Stockdon and others (2006). The parameterization relates onshore wave setup to offshore wave conditions and beach characteristics. Wave conditions were extracted at approximately the 10 m depth contour and reverse shoaled to the deep-water condition. These data were then matched to ...

This dataset presents alongshore wave setup timeseries for three states (Virginia, Georgia, and Florida) along the U.S. Atlantic coast. Wave setup was modelled using parameterization for open coast sandy beaches as presented in Stockdon and others (2006). The parameterization relates onshore wave setup to offshore wave conditions and beach characteristics. Wave conditions were extracted at approximately the 10 m depth contour and reverse shoaled to the deep-water condition. These data were then matched to ...

A dataset of modeled nearshore water levels (WLs) was developed for three states (Virginia, Georgia, and Florida) along the U.S. Atlantic coast. Water levels, defined for this dataset as the linear sum of tides and non-tidal residuals (NTR), were produced by Muis and others (2016) using a global tide and surge model (GTSM) forced by global atmospheric fields. Water level outputs were extracted from the global grid at approximately 20 km resolution along the Atlantic coastline. These data were then ...

A dataset of modeled nearshore water levels (WLs) was developed for three states (Virginia, Georgia, and Florida) along the U.S. Atlantic coast. Water levels, defined for this dataset as the linear sum of tides and non-tidal residuals (NTR), were produced by Muis and others (2016) using a global tide and surge model (GTSM) forced by global atmospheric fields -. Water level outputs were extracted from the global grid at approximately 20 km resolution along the coastlines. These data were then statistically ...

Provided here are the required input files to run a standalone wave model (Simulating Waves WAves Nearshore [SWAN]; Booij and others, 1999) on eleven model domains from the Canada-U.S. border to Norton Sound, Alaska to create a downscaled wave database (DWDB). The DWDB, in turn, can be used to reconstruct hindcast (1979-2019) and projected (2020-2050) time series at each point in the model domains see Engelstad and others, 2023 for further information on reconstruction of time-series. The model forcing ...

This data set consists of physics-based XBeach and SFINCS hydrodynamic model input files used for Coastal Storm Modeling System (CoSMoS) Tier 3 simulations. This data release is for Whatcom County in Washington State and presents the final tier 3 models used to produce output data that is then post-processed into final CoSMoS products. Example model input and configuration files are included for a single domain and SLR scenario, with the full modelling framework iterating on this process to simulate ...

Projected flood velocities associated with compound coastal flood hazards for future sea-level rise (SLR) and storm scenarios are provided for Whatcom County, Washington, in a series of raster geotiff files. Projections were made using a system of numerical models with atmospheric forcing, tides, sea level position and stream discharge driven by output from Global Climate Models (GCMs) from the Coupled Model Intercomparison Project Phase 5 (CMIP5). The resulting computed coastal flood velocities along the ...

Modeled wave time series data are presented for the hindcast period of 1979 to 2019 from the U.S. Canada border to the Bering Strait close to the 5 and 10 m isobaths. Outputs include three-hourly nearshore significant wave heights (Hs), mean wave periods (Tm) and mean wave directions (Dm) for 6424 locations. Data are available as netCDF files and are packaged for the Beaufort Sea region from the U.S. Canada border to Nuvuk (Point Barrow), and for the Chukchi Sea region from Nuvuk to Kotzebue Sound and from ...

Simulatations of water levels in the Salish Sea for a continuous hindcast of the period October 1, 1985, to September 30, 2015 were conducted to evaluate the utility and skill of a sea-level anomaly predictor and to develop extreme water level estimates accounting for decadal climate variability. The model accounts for sea level position, tides, remote sea-level anomalies, local winds and storm surge and stream flows as they affect water density. Comparison of modeled and measured water levels showed the ...

Simulations of the period 2016-2099 were conducted using the Salish Sea hydrodynamic model to evaluate extreme water levels associated with anticipated changes in sea level and climate forcing. The model projections accounting for sea level position, tides, remote sea-level anomalies, local winds and storm surge and stream flows as they affect water density. Dynamically downscaled Weather Research and Forecasting (WRF) CMIP5 GFDL wind and atmospheric pressure fields were prescribed over the model open ...

Simulations of water levels in the Salish Sea over the period October 1, 2016 to September 30, 2020 were conducted to validate the Salish Sea hydrodynamic model. The model accounts for sea level position, tides, remote sea-level anomalies, local winds and storm surge and stream flows as they affect water density. Comparison of modeled and measured water levels showed the model predicts extreme water levels at NOAA and USGS tide gage stations within 0.15 m. Model inputs and outputs of time-series forcing and ...

Groundwater emergence and shoaling extents are derived from water table depth GeoTIFFs, which are calculated as steady-state groundwater model heads subtracted from high-resolution topographic digital elevation model (DEM) land surface elevations. Results are provided as shapefiles of water table depth in specific depth ranges.

Seamless unconfined groundwater heads for U.S. coastal North and South Carolina groundwater systems were modeled with homogeneous, steady-state MODFLOW simulations. The geographic extent examined was limited primarily to low-elevation (land surface less than approximately 10 m above mean sea level) areas. Steady-state MODFLOW groundwater flow models were used to obtain detailed (50-meter-scale) predictions over large geographic scales (100s of kilometers) of groundwater heads for both current and future sea ...

To predict water table depths, seamless groundwater heads for unconfined coastal North and South Carolina groundwater systems were modeled with homogeneous, steady-state MODFLOW simulations. The geographic extent examined was limited primarily to low-elevation (land surface less than approximately 10 m above mean sea level) areas. Steady-state MODFLOW groundwater flow models were used to obtain detailed (50-meter-scale) predictions over large geographic scales (100s of kilometers) of groundwater heads for ...

Groundwater emergence and shoaling extents are derived from water table depth GeoTIFFs, which are calculated as steady-state groundwater model heads subtracted from high-resolution topographic digital elevation model (DEM) land surface elevations. Results are provided as shapefiles of water table depth in specific depth ranges. Similar modeled data for North Carolina and South Carolina are available from Barnard and others, 2023 at https://doi.org/10.5066/P9W91314.

Seamless unconfined groundwater heads for U.S. coastal Virginia, Georgia, and Florida (Atlantic and Gulf coast south of Sarasota) groundwater systems were modeled with homogeneous, steady-state MODFLOW simulations. The geographic extent examined was limited primarily to low-elevation (land surface less than approximately 10 m above mean sea level) areas. Steady-state MODFLOW groundwater flow models were used to obtain detailed (50-meter-scale) predictions over large geographic scales (100s of kilometers) of ...

To predict water table depths, seamless groundwater heads for unconfined coastal Virginia, Georgia, and Florida (Atlantic and Gulf coast south of Sarasota) groundwater systems were modeled with homogeneous, steady-state MODFLOW simulations. The geographic extent examined was limited primarily to low-elevation (land surface less than approximately 10 m above mean sea level) areas. Steady-state MODFLOW groundwater flow models were used to obtain detailed (50-meter-scale) predictions over large geographic ...

Rates of land subsidence and uplift for the North and South Carolina coasts are derived from Sentinel-1A/B (2015-2020) and ALOS (2007-2011) synthetic aperture radar (SAR) satellites, at approximately 50-75 m resolution and mm-level precision. The data consist of vertical land motion (VLM) rates and the 1-sigma error in land motion rates and are available as csv files.

This dataset contains rates of land subsidence and uplift derived from Sentinel-1A/B (2015-2020) and ALOS (2007-2011) synthetic aperture radar (SAR) satellites, at approximately 50-75 m resolution and mm-level precision for the U.S. Atlantic coast except for the states of North and South Carolina. The data consist of vertical land motion (VLM) rates and the 1-sigma error in land motion rates and are available as csv files. Similar vertical land motion rates for North Carolina and South Carolina are ...

This dataset contains projections of shoreline change and uncertainty bands for future scenarios of sea-level rise (SLR). Scenarios include 25, 50, 75, 100, 150, 200, and 300 centimeters (cm) of SLR by the year 2100. Output for SLR of 0 cm is also included, reflective of conditions in 2005, in accordance with recent SLR projections and guidance from the National Oceanic and Atmospheric Administration (NOAA; see process steps). Projections were made using the Coastal Storm Modeling System - Coastal One-line ...

This dataset contains shoreline positions derived from available Landsat satellite imagery for North Carolina and South Carolina for the time period of 1984 to 2021. Positions were determined using CoastSat (Vos and others, 2019a and 2019b), an open-source mapping toolbox, was used to classify coastal Landsat imagery and detect shorelines at the sub-pixel scale. To understand shoreline evolution in complex environments and operate long-term simulations illustrating potential shoreline positions in the next ...

This dataset contains projections of shoreline change and uncertainty bands for future scenarios of sea-level rise (SLR). Scenarios include 25, 50, 75, 100, 150, 200, and 300 centimeters (cm) of SLR by the year 2100. Output for SLR of 0 cm is also included, reflective of conditions in 2005, in accordance with recent SLR projections and guidance from the National Oceanic and Atmospheric Administration (NOAA; see process steps).Projections were made using the Coastal Storm Modeling System - Coastal One-line ...

This dataset contains shoreline positions derived from available Landsat satellite imagery for five states (Delaware, Maryland, Viginia, Georgia, and Florida) along the U.S. Atlantic coast for the time period 1984 to 2021. An open-source toolbox, CoastSat (Vos and others, 2019a and 2019b), was used to classify coastal Landsat imagery and detect shorelines at the sub-pixel scale. Resulting shorelines are presented in KMZ format. Significant uncertainty is associated with the locations of shorelines in ...