Hydrodynamic model of the San Francisco Bay and Delta, California
A one- and two-dimensional hydrodynamic model of the San Francisco Bay and Delta was constructed using the Delft3D Flexible Mesh Suite (Delft3D FM; Kernkamp and others, 2011; https://www.deltares.nl/en/software/delft3d-flexible-mesh-suite/) to simulate still water levels. Required model input files are provided to run the model for the time period from October 1, 2018, to April 30, 2019. This data release describes the construction and validation of the model application and provides input files suitable to ... |
Info |
Salish Sea water level hindcast simulations: 1985-2015
Simulatations of water levels in the Salish Sea for a continuous hindcast of the period October 1, 1985, to September 30, 2015 were conducted to evaluate the utility and skill of a sea-level anomaly predictor and to develop extreme water level estimates accounting for decadal climate variability. The model accounts for sea level position, tides, remote sea-level anomalies, local winds and storm surge and stream flows as they affect water density. Comparison of modeled and measured water levels showed the ... |
Info |
Salish Sea water level simulation projections: 2016-2099
Simulations of the period 2016-2099 were conducted using the Salish Sea hydrodynamic model to evaluate extreme water levels associated with anticipated changes in sea level and climate forcing. The model projections accounting for sea level position, tides, remote sea-level anomalies, local winds and storm surge and stream flows as they affect water density. Dynamically downscaled Weather Research and Forecasting (WRF) CMIP5 GFDL wind and atmospheric pressure fields were prescribed over the model open ... |
Info |
Salish Sea water level validation simulations: 2017-2020
Simulations of water levels in the Salish Sea over the period October 1, 2016 to September 30, 2020 were conducted to validate the Salish Sea hydrodynamic model. The model accounts for sea level position, tides, remote sea-level anomalies, local winds and storm surge and stream flows as they affect water density. Comparison of modeled and measured water levels showed the model predicts extreme water levels at NOAA and USGS tide gage stations within 0.15 m. Model inputs and outputs of time-series forcing and ... |
Info |
CoSMoS Whatcom County model input files
This data set consists of physics-based XBeach and SFINCS hydrodynamic model input files used for Coastal Storm Modeling System (CoSMoS) Tier 3 simulations. This data release is for Whatcom County in Washington State and presents the final tier 3 models used to produce output data that is then post-processed into final CoSMoS products. Example model input and configuration files are included for a single domain and SLR scenario, with the full modelling framework iterating on this process to simulate ... |
Info |
Projections of coastal flood depths for Whatcom County, Northwest Washington State coast (2015-2100)
Projected flood depths associated with compound coastal flood hazards for future sea-level rise (SLR) and storm scenarios are provided for Whatcom County, Washington, in a series of raster geotiff files. Projections were made using a system of numerical models with atmospheric forcing, tides, sea level position and stream discharge driven by output from Global Climate Models (GCMs) from the Coupled Model Intercomparison Project Phase 5 (CMIP5). The resulting computed coastal flood depths along the Whatcom ... |
Info |
Projections of coastal flood durations for Whatcom County, Northwest Washington State coast (2015-2100)
Projected flood duration associated with compound coastal flood hazards for future sea-level rise (SLR) and storm scenarios are provided for Whatcom County, Washington, in a series of raster geotiff files. Projections were made using a system of numerical models with atmospheric forcing, tides, sea level position and stream discharge driven by output from Global Climate Models (GCMs) from the Coupled Model Intercomparison Project Phase 5 (CMIP5). The resulting computed coastal flood duration along the ... |
Info |
Projections of coastal flood extents for Whatcom County, Northwest Washington State coast (2015-2100)
Projected flood extents associated with compound coastal flood hazards for future sea-level rise (SLR) and storm scenarios are provided for Whatcom County, Washington, in a series of shapefile files. Projections were made using a system of numerical models with atmospheric forcing, tides, sea level position and stream discharge driven by output from Global Climate Models (GCMs) from the Coupled Model Intercomparison Project Phase 5 (CMIP5). The resulting computed coastal flood extents along the Whatcom ... |
Info |
Projections of coastal flood velocities for Whatcom County, Northwest Washington State coast (2015-2100)
Projected flood velocities associated with compound coastal flood hazards for future sea-level rise (SLR) and storm scenarios are provided for Whatcom County, Washington, in a series of raster geotiff files. Projections were made using a system of numerical models with atmospheric forcing, tides, sea level position and stream discharge driven by output from Global Climate Models (GCMs) from the Coupled Model Intercomparison Project Phase 5 (CMIP5). The resulting computed coastal flood velocities along the ... |
Info |
Projections of coastal flood water levels for Whatcom County, Northwest Washington State coast (2015-2100)
Projected flood levels associated with compound coastal flood hazards for future sea-level rise (SLR) and storm scenarios are provided for Whatcom County, Washington, in a series of raster geotiff files. Projections were made using a system of numerical models with atmospheric forcing, tides, sea level position and stream discharge driven by output from Global Climate Models (GCMs) from the Coupled Model Intercomparison Project Phase 5 (CMIP5). The resulting computed coastal flood levels along the Whatcom ... |
Info |
Projections of wave heights for Whatcom County, Northwest Washington State coast (2015-2100)
Projected wave heights associated with compound coastal flood hazards for existing and future sea-level rise (SLR) and storm scenarios are shown for Whatcom County, Washington, in a series of raster geotiff files. Projections were made using a system of numerical models driven by output from Global Climate Models (GCMs) from the Coupled Model Intercomparison Project Phase 5 (CMIP5). The resulting data are water levels of projected flood hazards along the Whatcom County coast due to sea level rise and ... |
Info |