Digital elevation models (DEMs) were created from aerial imagery collected between August 30 and September 2, 2019, along the North Carolina coast between the Virginia-North Carolina border vicinity and Cape Lookout, North Carolina. These DEMs were created to document ground conditions prior to Hurricane Dorian, which made landfall on the North Carolina coast on September 6, 2019. The DEMs help researchers estimate the land surface before Hurricane Dorian and were created to document inter-annual changes in ...

Digital elevation models (DEMs) were created from aerial imagery collected between September 08 and September 13, 2019, along the North Carolina coast between the Virginia-North Carolina border vicinity and Cape Lookout, North Carolina. These DEMs were created to document ground conditions post-Hurricane Dorian, which made landfall on the North Carolina coast on September 6, 2019. The DEMs help researchers estimate the land surface after Hurricane Dorian and were created to document inter-annual changes in ...

Digital elevation models (DEMs) were created from aerial imagery collected November 26, 2019, along the North Carolina coast between the Virginia-North Carolina border vicinity and Cape Lookout, North Carolina. These DEMs were created to document ground conditions two-months after Hurricane Dorian, which made landfall on the North Carolina coast on September 6, 2019. The DEMs help researchers estimate the land surface one-month post-Hurricane Dorian and were created to document inter-annual changes in ...

Digital elevation models (DEMs) were created from aerial imagery collected February 08 and 09, 2020, along the North Carolina coast between the Virginia-North Carolina border vicinity and Cape Lookout, North Carolina. These DEMs were created to document recovery ground conditions after Hurricane Dorian, which made landfall on the North Carolina coast on September 6, 2019. The DEMs help researchers document inter-annual changes in shoreline position and coastal morphology in response to storm events using ...

A 1-m resolution, continuous surface, bathymetric digital elevation model (DEM) of the northern portion of San Francisco Bay, which includes San Pablo Bay, Carquinez Strait, and portions of Suisun Bay, was constructed from bathymetric surveys collected from 1999 to 2016. In 2014 and 2015 the California Ocean Protection Council (OPC) contracted the collection of bathymetric surveys of large portions of San Francisco Bay. A total of 93 surveys were collected using a combination of multibeam and ...

A 1-m resolution, continuous surface, bathymetric digital elevation model (DEM) of the northern portion of San Francisco Bay, which includes San Pablo Bay, Carquinez Strait, and portions of Suisun Bay, was constructed from bathymetric surveys collected from 1999 to 2016. In 2014 and 2015 the California Ocean Protection Council (OPC) contracted the collection of bathymetric surveys of large portions of San Francisco Bay. A total of 93 surveys were collected using a combination of multibeam and ...

A 1-m resolution, continuous surface, bathymetric digital elevation model (DEM) of the central portion of San Francisco Bay, was constructed from bathymetric surveys collected from 2005 to 2020. In 2014 and 2015 the California Ocean Protection Council (OPC) contracted the collection of bathymetric surveys of large portions of San Francisco Bay. A total of 93 surveys were collected using a combination of multibeam and interferometric side-scan sonar systems. Of those 93 surveys, 75 consist of swaths of data ...

A 1-m resolution, continuous surface, bathymetric digital elevation model (DEM) of the central portion of San Francisco Bay, was constructed from bathymetric surveys collected from 2005 to 2020. In 2014 and 2015 the California Ocean Protection Council (OPC) contracted the collection of bathymetric surveys of large portions of San Francisco Bay. A total of 93 surveys were collected using a combination of multibeam and interferometric side-scan sonar systems. Of those 93 surveys, 75 consist of swaths of data ...

This metadata describes a digital elevation model (DEM) created from bathymetric and topographic data collected between 2017 and 2019 in the Sacramento River Deep Water Ship Channel (DWSC), northern Sacramento-San Joaquin Delta, California. We merged the newly collected bathymetric and topographic data presented in this data release (DOI:10.5066/P9AQSRVH) with 2019 surveys by the California Department of Water Resources (DWR) and 2017 USGS Sacramento Delta Lidar, to produce a seamless digital elevation ...

This metadata describes a digital elevation model (DEM) created from bathymetric and topographic data collected between 2004 and 2019 in the Cache Slough Complex (CSC), northern Sacramento-San Joaquin Delta, California. We merged the newly collected bathymetric and topographic data presented in this data release (DOI:10.5066/P9AQSRVH) with 2019 surveys by the California Department of Water Resources (DWR), 2017 USGS Sacramento Delta Lidar, and 2004 bathymetry data from the Army Corp of Engineers. Small gaps ...

This part of the data release presents a digital elevation model (DEM) derived from bathymetry and topography data of the Elwha River delta collected in August 2011. Two dams on the Elwha River, Washington State, USA trapped over 20 million m3 of sediment, reducing downstream sediment fluxes and contributing to erosion of the river's coastal delta. The removal of the Elwha and Glines Canyon dams between 2011 and 2014 induced massive increases in river sediment supply and provided an unprecedented ...

This portion of the USGS data release presents digital elevation models (DEMs) derived from bathymetric and topographic surveys conducted on the Elwha River delta in July 2017 (USGS Field Activity Number 2017-638-FA). Nearshore bathymetry data were collected using two personal watercraft (PWCs) and a kayak equipped with single-beam echosounders and survey-grade global navigation satellite systems (GNSS) receivers. Topographic data were collected on foot with survey-grade GNSS receivers mounted on backpacks. ...

A 1-m resolution, continuous surface, bathymetric digital elevation model (DEM) of the southern portion of San Francisco Bay, was constructed from bathymetric surveys collected from 2005 to 2020. In 2014 and 2015 the California Ocean Protection Council (OPC) contracted the collection of bathymetric surveys of large portions of San Francisco Bay. A total of 93 surveys were collected using a combination of multibeam and interferometric side-scan sonar systems. Of those 93 surveys, 75 consist of swaths of data ...

Digital elevation models (DEMs) of the lower Elwha River, Washington, were created by synthesizing lidar and PlaneCam Structure-from-Motion (SfM) data. Lidar and still digital photographs were collected by airplane during surveys from 2012 to 2016. The digital photographs were used to create a SfM digital surface model. Each DEM represents the ending conditions for that water year (for example, the 2013 DEM represents conditions at approximately September 30, 2013). The final DEMs, presented here, were ...

This part of the data release presents a digital elevation model (DEM) derived from bathymetry and topography data of the Elwha River delta collected in August 2012. Two dams on the Elwha River, Washington State, USA trapped over 20 million m3 of sediment, reducing downstream sediment fluxes and contributing to erosion of the river's coastal delta. The removal of the Elwha and Glines Canyon dams between 2011 and 2014 induced massive increases in river sediment supply and provided an unprecedented ...

This part of the data release presents a digital elevation model (DEM) derived from bathymetry and topography data of the Elwha River delta collected in March 2013. Two dams on the Elwha River, Washington State, USA trapped over 20 million m3 of sediment, reducing downstream sediment fluxes and contributing to erosion of the river's coastal delta. The removal of the Elwha and Glines Canyon dams between 2011 and 2014 induced massive increases in river sediment supply and provided an unprecedented opportunity ...

Digital elevation models (DEMs) were created from aerial imagery collected October 11, 2019, along the North Carolina coast between the Virginia-North Carolina border vicinity and Cape Lookout, North Carolina. These DEMs were created to document ground conditions one-month after Hurricane Dorian, which made landfall on the North Carolina coast on September 6, 2019. The DEMs help researchers estimate the land surface one-month post-Hurricane Dorian and were created to document inter-annual changes in ...

This product is a digital elevation model (DEM) for the Little Holland Tract in the Sacramento-San Joaquin River Delta, California based on U.S. Geological Survey (USGS)-collected elevation data, merged with existing topographic and bathymetric elevation data. The USGS collected topographic and bathymetric elevation data in 2015, using a combination of methods. Topographic and shallow-water bathymetric data were collected on foot using a global positioning system (GPS) backpack platform that consisted of ...

This part of the data release presents a digital elevation model (DEM) derived from bathymetry and topography data of the Elwha River delta collected in July 2015. Two dams on the Elwha River, Washington State, USA trapped over 20 million m3 of sediment, reducing downstream sediment fluxes and contributing to erosion of the river's coastal delta. The removal of the Elwha and Glines Canyon dams between 2011 and 2014 induced massive increases in river sediment supply and provided an unprecedented opportunity ...

This part of the data release presents digital elevation models (DEMs) spanning the ocean shoreline of Alaska from Icy Cape to Cape Prince of Wales. Aerial images were collected, and data were processed, by Fairbanks Fodar (https://www.fairbanksfodar.com) in Fairbanks, Alaska, for the U.S. Geological Survey. The aerial images, from which the DEMs were created, were collected in 2016 between August 29 and September 4 and extend from the shoreline to 400-4000 meters inland. The aerial images were collected ...

This part of the data release presents a digital elevation model (DEM) derived from bathymetry and topography data of the Elwha River delta collected in September 2013. Two dams on the Elwha River, Washington State, USA trapped over 20 million m3 of sediment, reducing downstream sediment fluxes and contributing to erosion of the river's coastal delta. The removal of the Elwha and Glines Canyon dams between 2011 and 2014 induced massive increases in river sediment supply and provided an unprecedented ...

This part of the data release presents a digital elevation model (DEM) derived from bathymetry and topography data of the Elwha River delta collected in January 2015. Two dams on the Elwha River, Washington State, USA trapped over 20 million m3 of sediment, reducing downstream sediment fluxes and contributing to erosion of the river's coastal delta. The removal of the Elwha and Glines Canyon dams between 2011 and 2014 induced massive increases in river sediment supply and provided an unprecedented ...

This part of the data release presents a digital elevation model (DEM) derived from bathymetry and topography data of the Elwha River delta collected in February 2016. Two dams on the Elwha River, Washington State, USA trapped over 20 million m3 of sediment, reducing downstream sediment fluxes and contributing to erosion of the river's coastal delta. The removal of the Elwha and Glines Canyon dams between 2011 and 2014 induced massive increases in river sediment supply and provided an unprecedented ...

This part of the data release presents digital elevation models (DEMs) derived from bathymetry and topography data of northern Monterey Bay, California collected in October 2014. Bathymetry data were collected using two personal watercraft (PWCs), each equipped with single-beam echosounders and survey-grade global navigation satellite system (GNSS) receivers. Topography data were collected on foot with GNSS receivers mounted on backpacks and with an all-terrain vehicle (ATV) using a GNSS receiver mounted at ...

This part of the data release presents digital elevation models (DEMs) derived from bathymetry and topography data of northern Monterey Bay, California collected in March 2015. Bathymetry data were collected using two personal watercraft (PWCs), each equipped with single-beam echosounders and survey-grade global navigation satellite system (GNSS) receivers. Topography data were collected on foot with GNSS receivers mounted on backpacks and with an all-terrain vehicle (ATV) using a GNSS receiver mounted at a ...

Digital elevation models (DEMs) were created from aerial imagery collected May 08 and 09, 2020, along the North Carolina coast between the Virginia-North Carolina border vicinity and Cape Lookout, North Carolina. These DEMs were created to document recovery ground conditions after Hurricane Dorian, which made landfall on the North Carolina coast on September 6, 2019. The DEMs help researchers document inter-annual changes in shoreline position and coastal morphology in response to storm events using aerial ...

This portion of the USGS data release presents digital elevation models (DEMs) derived from bathymetric and topographic surveys conducted on the Elwha River delta in August 2022 (USGS Field Activity Number 2022-638-FA). Nearshore bathymetry data were collected using two personal watercraft (PWCs) and a kayak equipped with single-beam echosounders and survey-grade global navigation satellite systems (GNSS) receivers. Topographic data were collected on foot with survey-grade GNSS receivers mounted on ...

Imagery acquired with unmanned aerial systems (UAS) and coupled with structure from motion (SfM) photogrammetry can produce high-resolution topographic and visual reflectance datasets that rival or exceed lidar and orthoimagery. These new techniques are particularly useful for data collection of coastal systems, which requires high temporal and spatial resolution datasets. The U.S. Geological Survey worked in collaboration with members of the Marine Biological Laboratory and Woods Hole Analytics at Black ...

This part of the data release presents digital elevation models (DEMs) derived from bathymetry and topography data of northern Monterey Bay, California collected in September and October 2015. Bathymetry data were collected using two personal watercraft (PWCs), each equipped with single-beam echosounders and survey-grade global navigation satellite system (GNSS) receivers. Topography data were collected on foot with GNSS receivers mounted on backpacks and with an all-terrain vehicle (ATV) using a GNSS ...

The USGS Digital Elevation Model (DEM) data files are digital representations of cartographic information in a raster form. DEMs consist of a sampled array of elevations for a number of ground positions at regularly spaced intervals. The DEM data for 7.5-minute units correspond to the USGS 1:24,000- and 1:25,000-scale topographic quadrangle map series for all of the United States and its territories. Each 7.5-minute DEM is based on 30- by 30-meter data spacing with the Universal Transverse Mercator (UTM) ...

This part of the data release presents digital elevation models (DEMs) derived from bathymetry and topography data of northern Monterey Bay, California collected in March 2016. Bathymetry data were collected using two personal watercraft (PWCs), each equipped with single-beam echosounders and survey-grade global navigation satellite system (GNSS) receivers. Topography data were collected on foot with GNSS receivers mounted on backpacks and with an all-terrain vehicle (ATV) using a GNSS receiver mounted at a ...

This part of the data release presents digital elevation models (DEMs) derived from bathymetry and topography data of northern Monterey Bay, California collected in September and October 2016. Bathymetry data were collected using a personal watercraft (PWC) and small boat, each equipped with single-beam echosounders and survey-grade global navigation satellite system (GNSS) receivers. Topography data were collected on foot with GNSS receivers mounted on backpacks and with an all-terrain vehicle (ATV) using ...

This part of the data release presents digital elevation models (DEMs) derived from bathymetry and topography data of northern Monterey Bay, California collected in March 2017. Bathymetry data were collected using two personal watercraft (PWCs), each equipped with single-beam echosounders and survey-grade global navigation satellite system (GNSS) receivers. Topography data were collected on foot with GNSS receivers mounted on backpacks and with an all-terrain vehicle (ATV) using a GNSS receiver mounted at a ...

This part of the data release presents digital elevation models (DEMs) derived from bathymetry and topography data of northern Monterey Bay, California collected in September 2017. Bathymetry data were collected using two personal watercraft (PWCs), each equipped with single-beam echosounders and survey-grade global navigation satellite system (GNSS) receivers. Topography data were collected on foot with GNSS receivers mounted on backpacks and with an all-terrain vehicle (ATV) using a GNSS receiver mounted ...

This part of the data release presents a digital elevation model (DEM) derived from bathymetry and topography data of the Elwha River delta collected in April 2014. Two dams on the Elwha River, Washington State, USA trapped over 20 million m3 of sediment, reducing downstream sediment fluxes and contributing to erosion of the river's coastal delta. The removal of the Elwha and Glines Canyon dams between 2011 and 2014 induced massive increases in river sediment supply and provided an unprecedented opportunity ...

This part of the data release presents a digital elevation model (DEM) derived from bathymetry and topography data of the Elwha River delta collected in May 2012. Two dams on the Elwha River, Washington State, USA trapped over 20 million m3 of sediment, reducing downstream sediment fluxes and contributing to erosion of the river's coastal delta. The removal of the Elwha and Glines Canyon dams between 2011 and 2014 induced massive increases in river sediment supply and provided an unprecedented opportunity ...

This portion of the USGS data release presents digital elevation models (DEMs) derived from bathymetric and topographic surveys conducted on the Elwha River delta in July 2018 (USGS Field Activity Number 2018-648-FA). Nearshore bathymetry data were collected using two personal watercraft (PWCs) and a kayak equipped with single-beam echosounders and survey-grade global navigation satellite systems (GNSS) receivers. Topographic data were collected on foot with survey-grade GNSS receivers mounted on backpacks. ...

This part of the data release presents a digital elevation model (DEM) derived from bathymetry and topography data of the Elwha River delta collected in September 2010. Two dams on the Elwha River, Washington State, USA trapped over 20 million m3 of sediment, reducing downstream sediment fluxes and contributing to erosion of the river's coastal delta. The removal of the Elwha and Glines Canyon dams between 2011 and 2014 induced massive increases in river sediment supply and provided an unprecedented ...

This portion of the USGS data release presents digital elevation models (DEMs) derived from bathymetric and topographic surveys conducted on the Elwha River delta in August 2019 (USGS Field Activity Number 2019-633-FA). Nearshore bathymetry data were collected using two personal watercraft (PWCs) equipped with single-beam echosounders and survey-grade global navigation satellite systems (GNSS) receivers. Topographic data were collected on foot with survey-grade GNSS receivers mounted on backpacks. Positions ...

A 1-m resolution, continuous surface, bathymetric digital elevation model (DEM) of the southern portion of San Francisco Bay, was constructed from bathymetric surveys collected from 2005 to 2020. In 2014 and 2015 the California Ocean Protection Council (OPC) contracted the collection of bathymetric surveys of large portions of San Francisco Bay. A total of 93 surveys were collected using a combination of multibeam and interferometric side-scan sonar systems. Of those 93 surveys, 75 consist of swaths of data ...

This part of the data release presents a digital elevation model (DEM) derived from bathymetry and topography data of the Elwha River delta collected in July 2016. Two dams on the Elwha River, Washington State, USA trapped over 20 million m3 of sediment, reducing downstream sediment fluxes and contributing to erosion of the river's coastal delta. The removal of the Elwha and Glines Canyon dams between 2011 and 2014 induced massive increases in river sediment supply and provided an unprecedented opportunity ...

This part of the data release presents a digital elevation model (DEM) derived from bathymetry and topography data of the Elwha River delta collected in May 2011. Two dams on the Elwha River, Washington State, USA trapped over 20 million m3 of sediment, reducing downstream sediment fluxes and contributing to erosion of the river's coastal delta. The removal of the Elwha and Glines Canyon dams between 2011 and 2014 induced massive increases in river sediment supply and provided an unprecedented opportunity ...

This part of the data release presents a digital elevation model (DEM) derived from bathymetry and topography data of the Elwha River delta collected in September 2014. Two dams on the Elwha River, Washington State, USA trapped over 20 million m3 of sediment, reducing downstream sediment fluxes and contributing to erosion of the river's coastal delta. The removal of the Elwha and Glines Canyon dams between 2011 and 2014 induced massive increases in river sediment supply and provided an unprecedented ...

The United States Geological Survey Saint Petersburg Coastal and Marine Science Center (USGS SPCMSC), in cooperation with the United States Army Corps of Engineers (USACE) conducted bathymetric surveys of the nearshore waters surrounding Ship and Horn Islands, Gulf Islands National Seashore, Mississippi (GUIS). Camille Cut separates Ship Island into East Ship Island and West Ship Island. The objective of this study was to establish base-level elevation conditions around West Ship Island, East Ship Island, ...

Low-altitude (80-100 meters above ground level) digital images were obtained from a camera mounted on a 3DR Solo quadcopter, a small unmanned aerial system (UAS), in three locations along the Lake Ontario shoreline in New York during July 2017. These data were collected to document and monitor effects of high lake levels, including shoreline erosion, inundation, and property damage in the vicinity of Chimney Bluffs State Park, New York. This data release includes images tagged with locations determined from ...

Low-altitude (80-100 meters above ground level) digital images were obtained from a camera mounted on a 3DR Solo quadcopter, a small unmanned aerial system (UAS), along the Lake Ontario shoreline in New York during July 2017. These data were collected to document and monitor effects of high lake levels, including shoreline erosion, inundation, and property damage in the vicinity of Sodus Bay, New York. This data release includes images tagged with locations determined from the UAS GPS; tables with updated ...

Low-altitude (80-100 meters above ground level) digital images were obtained from a camera mounted on a 3DR Solo quadcopter, a small unmanned aerial system (UAS), along the Lake Ontario shoreline in New York during July 2017. These data were collected to document and monitor effects of high lake levels, including shoreline erosion, inundation, and property damage in the vicinity of Sodus Bay, New York. This data release includes images tagged with locations determined from the UAS GPS; tables with updated ...

Low-altitude (80-100 meters above ground level) digital images were obtained from a camera mounted on a 3DR Solo quadcopter, a small unmanned aerial system (UAS), along the Lake Ontario shoreline in New York during July 2017. These data were collected to document and monitor effects of high lake levels, including shoreline erosion, inundation, and property damage in the vicinity of Sodus Bay, New York. This data release includes images tagged with locations determined from the UAS GPS; tables with updated ...

Low-altitude (80-100 meters above ground level) digital images were obtained from a camera mounted on a 3DR Solo quadcopter, a small unmanned aerial system (UAS), along the Lake Ontario shoreline in New York during July 2017. These data were collected to document and monitor effects of high lake levels, including shoreline erosion, inundation, and property damage in the vicinity of Sodus Bay, New York. This data release includes images tagged with locations determined from the UAS GPS; tables with updated ...

This data release presents structure-from-motion (SFM) products derived from aerial imagery surveys with precise Global Navigation Satellite System (GNSS) navigation data flown in a piloted fixed wing aircraft taken along the North Carolina coast in response to Hurricane Florence (available here https://coastal.er.usgs.gov/data-release/doi-P91KB9SF/). USGS researchers use the elevation models and orthorectified imagery to assess future coastal vulnerability, nesting habitats for wildlife, and provide data ...

Aerial imagery acquired with a small unmanned aircraft system (sUAS), in conjunction with surveyed ground control points (GCP) visible in the imagery, can be processed with structure-from-motion (SfM) photogrammetry techniques to produce high-resolution orthomosaics, three-dimensional (3D) point clouds and digital elevation models (DEMs). This dataset, prepared by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC), provides UAS survey data products consisting of DEMs ...

The United States Geological Survey Saint Petersburg Coastal and Marine Science Center (USGS SPCMSC), in cooperation with the United States Army Corps of Engineers (USACE) conducted bathymetric surveys of the nearshore waters surrounding Ship and Horn Islands, Gulf Islands National Seashore, Mississippi (GUIS). Camille Cut separates Ship Island into East Ship Island and West Ship Island. The objective of this study was to establish base-level elevation conditions around West Ship Island, East Ship Island, ...

A topographic lidar survey was conducted on July 12-14, 2013 over Dauphin Island, Alabama and Chandeleur, Stake, Grand Gosier and Breton Islands, Louisiana. The data were collected at a nominal pulse space of 1 meter (m) and processed to identify bare earth elevations. Bare earth Digital Elevation Models (DEMs) were generated based on these data. Photo Science, Inc., was contracted by the U.S. Geological Survey (USGS) to collect and process the lidar data. The bare earth DEMs are 32-bit floating point ERDAS ...

A topographic lidar survey was conducted from September 5 to October 11, 2012, for the barrier islands of Alabama, Mississippi and southeast Louisiana, including the coast near Port Fourchon. Most of the data were collected September 5-10, 2012, with a reflight conducted on October 11, 2012, to increase point density in some areas. The data were collected at a nominal pulse space of 1-meter (m) and processed to identify bare earth elevations. Bare earth Digital Elevation Models(DEMs) were generated based ...

To characterize coastal change, historical maps and complementary records were compiled including: topographic sheets (T-sheets), hydrographic sheets (H-sheets, smooth sheets), shorelines, and bathymetric soundings surrounding the Mississippi (MS) barrier islands over several time periods (1916-1920, 2008-2009 and 2016). One goal of this work was to create a time-series of bathymetric change maps around the islands. This USGS data release includes three digital elevation models (DEMs) for 1916 to 1920, 2008 ...

A digital elevation model (DEM) mosaic was produced for Anegada, British Virgin Islands, from remotely sensed, geographically referenced elevation measurements collected by Watershed Sciences, Inc. (WSI)/Quantum Spatial using an Optech Orion M300 (1064-nm wavelength) lidar sensor on January 21, 2014.

A seamless (bare earth and submerged) topography Digital Elevation Model (DEM) mosaic for a portion of the submerged environs of Anegada, British Virgin Islands, was produced from remotely sensed, geographically referenced elevation measurements collected March 19-20, 2014 by the U.S. Geological Survey. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), a pulsed laser ranging system mounted onboard an aircraft to measure ...

A digital elevation model (DEM) mosaic was produced for Assateague Island, Maryland and Virginia, post-Hurricane Joaquin, from remotely sensed, geographically referenced elevation measurements collected by Quantum Spatial using a Leica ALS70 (1064-nm wavelength) lidar sensor.

To characterize coastal change, historical maps and complementary records were compiled including: topographic sheets (T-sheets), hydrographic sheets (H-sheets, smooth sheets), shorelines, and bathymetric soundings surrounding the Mississippi (MS) barrier islands over several time periods (1916-1920, 2008-2009 and 2016). One goal of this work was to create a time-series of bathymetric change maps around the islands. Datasets include 1916 through 1920 soundings collected by the United States Coast and ...

A high-resolution (10-meter per pixel) digital elevation model (DEM) was created for the Sacramento-San Joaquin Delta using both bathymetry and topography data. This DEM is the result of collaborative efforts of the U.S. Geological Survey (USGS) and the California Department of Water Resources (DWR). The base of the DEM is from a 10-m DEM released in 2004 and updated in 2005 (Foxgrover and others, 2005) that used Environmental Systems Research Institute(ESRI), ArcGIS Topo to Raster module to interpolate ...

To characterize coastal change, historical maps and complementary records were compiled including: topographic sheets (T-sheets), hydrographic sheets (H-sheets, smooth sheets), shorelines, and bathymetric soundings surrounding the Mississippi (MS) barrier islands over several time periods (1916-1920, 2008-2009 and 2016). One goal of this work was to create a time-series of bathymetric change maps around the islands. Datasets include 1916 through 1920 soundings collected by the United States Coast and ...

The U.S. Geological Survey St. Petersburg Coastal and Marine Science Center (USGS-SPCMSC) and the U.S. Army Corps of Engineers Field Research Facility (USACE-FRF) of Duck, NC collaborated to gather alongshore ground-based lidar beach topography at Fire Island, NY. This high-resolution elevation dataset was collected on April 1, 2014, and is part of the USGS's ongoing beach monitoring effort under Hurricane Sandy Supplemental Project GS2-2B. This USGS Data Release includes the resulting processed elevation ...

A bare-earth topography Digital Elevation Model (DEM) mosaic for the Canyonlands and Upper Neches River Corridor Units of Big Thicket National Preserve in Texas was produced from remotely sensed, geographically referenced elevation measurements collected on January 11, 15, 17, 18, 21, 23, 25, and 29, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced ...

To characterize coastal change, historical maps and complementary records were compiled including: topographic sheets (T-sheets), hydrographic sheets (H-sheets, smooth sheets), shorelines, and bathymetric soundings surrounding the Mississippi (MS) barrier islands over several time periods (1916-1920, 2008-2009 and 2016). One goal of this work was to create a time-series of bathymetric change maps around the islands. Datasets include 1916 through 1920 soundings collected by the United States Coast and ...

A DEM was produced for a portion of the New York, Delaware, Maryland, Virginia, and North Carolina coastlines, post-Hurricane Sandy (Sandy was an October 2012 hurricane that made landfall as an extratropical cyclone on the 29th), from remotely sensed, geographically referenced elevation measurements collected by Photo Science, Inc. (Delaware, Maryland, Virgina, and North Carolina) and Woolpert, Inc. (Fire Island, New York) using airborne lidar sensors.

This data represents the tile index for lidar data collected for the U.S. Geological Survey in November 2012 following Hurricane Sandy, which made landfall in the eastern United States on October 29th, 2012. The lidar LAS and derived-digital elevation model (DEM) data are divided into these tiles and filenames match the tile number. The index shows the extent of data collection (portions of the coastline of New York, Delaware, Maryland, Virginia, and North Carolina) and provides tile names to aid in ...

A bare-earth topography Digital Elevation Model (DEM) mosaic for the Little Pine Island Bayou Corridor Unit of Big Thicket National Preserve in Texas was produced from remotely sensed, geographically referenced elevation measurements collected on January 15, 21, 22, 26, and 30, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar ...

A first-surface topography Digital Elevation Model (DEM) mosaic for the Little Pine Island Bayou Corridor Unit of Big Thicket National Preserve in Texas was produced from remotely sensed, geographically referenced elevation measurements collected on January 15, 21, 22, 26, and 30, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar ...

Polygon shapefile showing the footprint boundaries, source agency origins, and resolutions of compiled bathymetric digital elevation models (DEMs) used to construct a continuous, high-resolution DEM of the central portion of San Francisco Bay.

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center in Florida and the U.S. Army Corps of Engineers Field Research Facility in Duck, North Carolina, collaborated to gather alongshore ground-based lidar beach elevation data at Fire Island, New York. This high-resolution elevation dataset was collected on April 10, 2013, to characterize beach topography following substantial erosion that occurred during Hurricane Sandy, which made landfall on October 29, 2012, and multiple, ...

Polygon shapefile showing the footprint boundaries, source agency origins, and resolutions of compiled bathymetric digital elevation models (DEMs) used to construct a continuous, high-resolution DEM of the northern portion of San Francisco Bay.

A digital elevation model (DEM) mosaic was produced for Fire Island, New York, from remotely sensed, geographically referenced elevation measurements collected by Photo Science, Inc. using an Optech Gemini lidar sensor flown on a Cessna 206 aircraft

Polygon shapefile showing the footprint boundaries, source agency origins, and resolutions of compiled bathymetric digital elevation models (DEMs) used to construct a continuous, high-resolution DEM of the southern portion of San Francisco Bay.

A digital elevation model (DEM) mosaic was produced for the Chandeleur Islands, Louisiana, from remotely sensed, geographically referenced elevation measurements collected by Leading Edge Geomatics (LEG) using a Leica Chiroptera II Bathymetric and Topographic Sensor. Dewberry reports that the nominal pulse spacing for this project was 1 point every 0.7 meters. Dewberry used proprietary procedures to classify the LAS according to project specifications: 0-Never Classified, 1-Unclassified, 2-Ground (includes ...

A submerged topography Digital Elevation Model (DEM) mosaic for a portion of the submerged environs of Saint Thomas, U.S. Virgin Islands, was produced from remotely sensed, geographically referenced elevation measurements collected on March 7, 8, 11, 12, 13, 14, 17, 18, and 24, 2014 by the U.S. Geological Survey, in collaboration with the National Oceanic and Atmospheric Administration (NOAA) Coral Reef Conservation Program. Elevation measurements were collected over the area using the second-generation ...

A seamless, three-meter digital elevation model (DEM) was constructed for the entire Southern California coastal zone, extending 473 km from Point Conception to the Mexican border. The goal was to integrate the most recent, high-resolution datasets available (for example, Light Detection and Ranging (Lidar) topography, multibeam and single beam sonar bathymetry, and Interferometric Synthetic Aperture Radar (IfSAR) topography) into a continuous surface from at least the 20-m isobath to the +20-m elevation ...

The numerical model XBeach (version 4937) was used to investigate how different storm scenarios impact the sediment berm constructed offshore of the Chandeleur Islands and adjacent areas. The XBeach model solves coupled 2-dimensional, horizontal wave propagation equations to predict flow, sediment transport, and bottom changes for varying spectral wave and flow boundary conditions (Roelvink and others, 2009 ). The XBeach model setup requires the input of a merged topographic and bathymetric DEM, and inputs ...

The U.S. Geological Survey St. Petersburg Coastal and Marine Science Center (USGS SPCMSC), collected single beam and swath bathymetry data from the northern Chandeleur Islands, Louisiana, in June of 2016. This USGS data release includes the resulting processed elevation point data (xyz) and an interpolated digital elevation model (DEM). This USGS data release provides 437-line kilometers (km) of processed single beam bathymetry (SBB) and interferometric bathymetry (IFB) data collected under Field Activity ...

A digital elevation model (DEM) mosaic for Fire Island, New York, was produced from remotely sensed, geographically referenced elevation measurements collected October 25 and November 8, 2002 by the U.S. Geological Survey, in cooperation with the National Park Service (NPS) and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the first-generation Experimental Advanced Airborne Research Lidar (EAARL-A), a pulsed laser ranging system mounted ...

Aerial imagery acquired with a small unmanned aircraft system (sUAS), in conjunction with surveyed ground control points (GCP) visible in the imagery, can be processed with structure-from-motion (SfM) photogrammetry techniques to produce high-resolution orthomosaics, three-dimensional (3D) point clouds and digital elevation models (DEMs). This dataset, prepared by the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC), provides UAS survey data products consisting of DEMs ...

Low-altitude (80-100 meters above ground level) digital images were obtained from a camera mounted on a 3DR Solo quadcopter, a small unmanned aerial system (UAS), in three locations along the Lake Ontario shoreline in New York during July 2017. These data were collected to document and monitor effects of high lake levels, including shoreline erosion, inundation, and property damage in the vicinities of Braddock Bay, Sodus Bay, and Chimney Bluffs State Park, New York. This data release includes images tagged ...

Low-altitude (80-100 meters above ground level) digital images were obtained from a camera mounted on a 3DR Solo quadcopter, a small unmanned aerial system (UAS), in three locations along the Lake Ontario shoreline in New York during July 2017. These data were collected to document and monitor effects of high lake levels, including shoreline erosion, inundation, and property damage in the vicinities of Braddock Bay, Sodus Bay, and Chimney Bluffs State Park, New York. This data release includes images tagged ...

A first-surface topography Digital Elevation Model (DEM) mosaic for the Canyonlands and Upper Neches River Corridor Units of Big Thicket National Preserve in Texas was produced from remotely sensed, geographically referenced elevation measurements collected on January 11, 15, 17, 18, 21, 23, 25, and 29, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced ...

A topographic Lidar survey was conducted on February 6, 2012, over the Chandeleur Islands, Louisiana. The data were collected at a nominal pulse space of 0.5-meter (m) and processed to identify bare earth elevations. Bare earth digital elevation models (DEMs) were generated based on these data. Digital Aerial Solutions, LLC, was contracted by the U.S. Geological Survey (USGS) to collect and process the lidar data. The bare earth DEMs are 32-bit floating point ERDAS Imagine (IMG) files with a horizontal ...

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

A GIS polygon shapefile outlining the extent of the 14 individual DEM sections that comprise the seamless, 2-meter resolution DEM for the open-coast region of the San Francisco Bay Area (outside of the Golden Gate Bridge), extending from Half Moon Bay to Bodega Head along the north-central California coastline. The goal was to integrate the most recent high-resolution bathymetric and topographic datasets available (for example, Light Detection and Ranging (lidar) topography, multibeam and single-beam sonar ...

A GIS polygon shapefile outlining the extent of small lakes or ponds within the terrain that were assigned a hydo-flattened elevation during lidar post-processing. DEM elevations within these small areas reflect water surface elevations, not bathymetric elevations.

A seamless, 2 meter resolution digital elevation model (DEM) was constructed for the open-coast region of the San Francisco Bay Area (outside of the Golden Gate Bridge), extending from Half Moon Bay to Bodega Head along the north-central California coastline. The goal was to integrate the most recent high-resolution bathymetric and topographic datasets available (for example, Light Detection and Ranging (lidar) topography, multibeam and single-beam sonar bathymetry) into a seamless surface model extending ...

The model input and output of topography and bathymetry values resulting from forecast simulations of coupled modeling scenarios occurring between 2015 and 2025 at Dauphin Island, Alabama, and described in U.S. Geological Survey (USGS) Open-File Report 2020–1001 (https://doi.org/10.3133/ofr20201001), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry, refer to Mickey and others (2020).

A GIS polygon shapefile outlining the boundaries of the native input datasets used to construct a seamless, 2-meter resolution digital elevation model (DEM) was constructed for the open-coast region of the San Francisco Bay Area (outside of the Golden Gate Bridge), extending from Half Moon Bay to Bodega Head along the North-central California coastline. The goal was to integrate the most recent high-resolution bathymetric and topographic datasets available (for example, Light Detection and Ranging (lidar) ...

Investigations of coastal change and coastal resources often require continuous elevation profiles from the seafloor to coastal terrestrial landscapes. Differences in elevation data collection in the terrestrial and marine environments result in separate elevation products that may not share a vertical datum. This data release contains the assimilation of multiple elevation products into a continuous digital elevation model at a resolution of 3-arcseconds (approximately 90 meters) from the terrestrial ...

These data map in high detail surficial cross-sections of North Core Banks, a barrier island in Cape Lookout National Seashore, NC, in October 2022. U.S. Geological Survey field efforts are part of an interagency agreement with the National Park Service to monitor the recovery of the island from Hurricanes Florence (2018) and Dorian (2019). Three sites of outwash, overwash, and pond formation were targeted for extensive vegetation ground-truthing, sediment samples, bathymetric mapping with a remote ...

Digital surface elevation models (DSMs) of the coastline of Barter Island, Alaska derived from aerial photographs collected on July 01 2014, September 07 2014, and July 05 2015. Aerial photographs and coincident elevation data were processed using Structure-from-Motion (SfM) photogrammetric techniques. These files are single-band, 32-bit floating point DSMs (digital surface models) that represent surface elevations of buildings, vegetation, and uncovered ground surfaces in meters with 23 cm ground sample ...

The data in this part of the release are digital surface models (DSMs) that characterize the beach at the USGS DUring Nearshore Event eXperiment (DUNEX) site on Pea Island National Wildlife Refuge, NC. DUNEX is a multi-agency, academic, and non-governmental organization collaborative community experiment designed to study nearshore coastal processes during storm events. USGS participation in DUNEX will contribute new measurements and models that will increase our understanding of storm impacts to coastal ...

The data in this release map Marconi Beach, Head of the Meadow Beach, and Nauset Light Beach, in Cape Cod National Seashore (CACO), Massachusetts, before and after Hurricane Lee in September 2023. U.S Geological Survey personnel conducted field surveys to collect topographic data using global navigation satellite systems (GNSS) at all three beaches. In addition, at Nauset Light Beach, an uncrewed aerial system (UAS) was used to collect images with a Ricoh GRII camera for use in structure from motion ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation for several sites along the Florida Reef Tract, Florida (FL) including the shallow seafloor along Key West, FL. USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric Administration (NOAA) ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify bathymetric changes near St. Thomas, U.S. Virgin Islands. Changes in seafloor elevation were calculated using historical bathymetric point data from the 1960s and 1970s (see Yates and others, 2017a) and light detection and ranging (lidar)-derived elevation data acquired in 2014 (NOAA, 2015) using methods outlined in Yates and others (2017b). An elevation change analysis between the historical ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify bathymetric changes at a subsection of Crocker Reef near Islamorada, Florida (FL), within a 6.1 square-kilometer area following the landfall of Hurricane Irma in September 2017. USGS staff used USGS multibeam data collected between October 10 and December 8, 2017 (Fredericks and others, 2019) and March 8-15, 2018 (Fredericks and others, 2019) to assess changes in seafloor elevation and structure ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation for several sites along the Florida Reef Tract, Florida (FL) including the shallow seafloor along the coast of Miami, FL. USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation for several sites along the Florida Reef Tract, Florida (FL) including the shallow seafloor along the coast of Miami, FL. USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation along the Florida Reef Tract, Florida (FL). USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric Administration (NOAA) Office of Coast Survey, see Yates and others, 2017) and light ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation along the Florida Reef Tract, Florida (FL). USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric Administration (NOAA) Office of Coast Survey, see Yates and others, 2017) and light ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation for several sites along the Florida Reef Tract, Florida (FL) including the shallow seafloor along Key West, FL. USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric Administration (NOAA) ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation for several sites along the Florida Reef Tract, Florida (FL) including the shallow seafloor along Key West, FL. USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric Administration (NOAA) ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation for several sites along the Florida Reef Tract, Florida (FL) including the shallow seafloor along the coast of Miami, FL. USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation for several sites along the Florida Reef Tract, Florida (FL) including the shallow seafloor along the coast of Miami, FL. USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Investigations of coastal change and coastal resources often require continuous elevation profiles from the seafloor to coastal terrestrial landscapes. Differences in elevation data collection in the terrestrial and marine environments result in separate elevation products that may not share a vertical datum. This data release contains the compilation of multiple elevation products into a continuous digital elevation model at a resolution of 3-arcseconds (approximately 90 meters) from the terrestrial ...

Investigations of coastal change and coastal resources often require continuous elevation profiles from the seafloor to coastal terrestrial landscapes. Differences in elevation data collection in the terrestrial and marine environments result in separate elevation products that may not share a vertical datum. This data release contains the assimilation of multiple elevation products into a continuous digital elevation model at a resolution of 3-arcseconds (approximately 90 meters) from the terrestrial ...

The objectives of the survey were to provide bathymetric and sidescan sonar data for sediment transport studies and coastal change model development for ongoing studies of nearshore coastal dynamics along Sandwich Town Neck Beach, MA. Data collection equipment used for this investigation are mounted on an unmanned surface vehicle (USV) uniquely adapted from a commercially sold gas-powered kayak and termed the "jetyak". The jetyak design is the result of a collaborative effort between USGS and Woods Hole ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation along the Florida Reef Tract, Florida (FL). USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric Administration (NOAA) Office of Coast Survey, see Yates and others, 2017) and light ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation for several sites along the Florida Reef Tract, Florida (FL) including the shallow seafloor along Key West, FL. USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric Administration (NOAA) ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation for several sites along the Florida Reef Tract, Florida (FL) including the shallow seafloor along Key West, FL. USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric Administration (NOAA) ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation for several sites along the Florida Reef Tract, Florida (FL) including the shallow seafloor along the coast of Miami, FL. USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation for several sites along the Florida Reef Tract, Florida (FL) including the shallow seafloor along the coast of Miami, FL. USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric ...

The data in this release map the beach and nearshore environment at Head of the Meadow Beach in Truro, MA and provide environmental context for the camera calibration information for the 2019 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. This is related to the field activity 2020-015-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of the CoastCam, which are ...

These data map the beach and nearshore environment at Head of the Meadow Beach in Truro, MA, providing updated regional context for the 2019 CoastCam installation. CoastCam CACO-01 are two video cameras aimed at the beach that view the coast shared by beachgoers, shorebirds, seals, and sharks. These data were collected as part of field activity 2021-014-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region. In February 2021, U.S. Geological Survey and ...

The data in this publication map the beach and nearshore environment at Marconi Beach in Wellfleet, MA and provide regional context for the 2021 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. These data were collected as part of field activity 2021-022-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of CoastCam CACO-02, which are two video cameras aimed at the ...

The data in this release re-map the beach and nearshore environment at Head of the Meadow Beach in Truro, MA and provide updated environmental context for the 2020 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. This is a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of CoastCam CACO-01, which are two video cameras aimed at the beach. In February and March 2024, U.S. ...

Integrated terrain models covering 16,357 square kilometers of the Massachusetts coastal zone and offshore waters were built to provide a continuous elevation and bathymetry terrain model for ocean planning purposes. The area is divided into the following four geographical areas to reduce file size and facilitate publishing: Massachusetts Bay from the Massachusetts-New Hampshire border south to Provincetown and Scituate and east to Stellwagen Bank; Cape Cod Bay from Provincetown to Scituate and south to ...

Integrated terrain models covering 16,357 square kilometers of the Massachusetts coastal zone and offshore waters were built to provide a continuous elevation and bathymetry terrain model for ocean planning purposes. The area is divided into the following four geographical areas to reduce file size and facilitate publishing: Massachusetts Bay from the Massachusetts-New Hampshire border south to Provincetown and Scituate and east to Stellwagen Bank; Cape Cod Bay from Provincetown to Scituate and south to ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify bathymetric changes at Crocker Reef near Islamorada, Florida (FL), within a 33.6 square-kilometer area following the landfall of Hurricane Irma in September 2017. USGS staff used light detection and ranging (lidar)-derived data acquired by the National Oceanic and Atmospheric Administration (NOAA) between July 21 and November 21, 2016 and USGS multibeam data collected between October 10 and ...

Integrated terrain models covering 16,357 square kilometers of the Massachusetts coastal zone and offshore waters were built to provide a continuous elevation and bathymetry terrain model for ocean planning purposes. The area is divided into the following four geographical areas to reduce file size and facilitate publishing: Massachusetts Bay from the Massachusetts-New Hampshire border south to Provincetown and Scituate and east to Stellwagen Bank; Cape Cod Bay from Provincetown to Scituate and south to ...

Integrated terrain models covering 16,357 square kilometers of the Massachusetts coastal zone and offshore waters were built to provide a continuous elevation and bathymetry terrain model for ocean planning purposes. The area is divided into the following four geographical areas to reduce file size and facilitate publishing: Massachusetts Bay from the Massachusetts-New Hampshire border south to Provincetown and Scituate and east to Stellwagen Bank; Cape Cod Bay from Provincetown to Scituate and south to ...

Integrated terrain models covering 16,357 square kilometers of the Massachusetts coastal zone and offshore waters were built to provide a continuous elevation and bathymetry terrain model for ocean planning purposes. The area is divided into the following four geographical areas to reduce file size and facilitate publishing: Massachusetts Bay from the Massachusetts-New Hampshire border south to Provincetown and Scituate and east to Stellwagen Bank; Cape Cod Bay from Provincetown to Scituate and south to ...

Integrated terrain models covering 16,357 square kilometers of the Massachusetts coastal zone and offshore waters were built to provide a continuous elevation and bathymetry terrain model for ocean planning purposes. The area is divided into the following four geographical areas to reduce file size and facilitate publishing: Massachusetts Bay from the Massachusetts-New Hampshire border south to Provincetown and Scituate and east to Stellwagen Bank; Cape Cod Bay from Provincetown to Scituate and south to ...

Integrated terrain models covering 16,357 square kilometers of the Massachusetts coastal zone and offshore waters were built to provide a continuous elevation and bathymetry terrain model for ocean planning purposes. The area is divided into the following four geographical areas to reduce file size and facilitate publishing: Massachusetts Bay from the Massachusetts-New Hampshire border south to Provincetown and Scituate and east to Stellwagen Bank; Cape Cod Bay from Provincetown to Scituate and south to ...

Integrated terrain models covering 16,357 square kilometers of the Massachusetts coastal zone and offshore waters were built to provide a continuous elevation and bathymetry terrain model for ocean planning purposes. The area is divided into the following four geographical areas to reduce file size and facilitate publishing: Massachusetts Bay from the Massachusetts-New Hampshire border south to Provincetown and Scituate and east to Stellwagen Bank; Cape Cod Bay from Provincetown to Scituate and south to ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

The sensitivity to sediment parameterization and initial bed configuration on sediment transport processes and morphological evolution are assessed through process-based numerical modeling. Six sensitivity cases using a previously validated model for Dauphin Island, Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on bed level morphology, barrier island evolution, and sediment fluxes. Delft3D model output of suspended and bedload sediment fluxes, and final bed levels data are ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Six elevation point cloud files in LAZ format (compressed LAS binary data) are included in this data release: 3 raw point clouds of unclassified and unedited points and 3 modified point clouds that were spatially shifted and edited to remove outliers and spurious elevation values associated with moving water surfaces. An XYZ coordinate shift was applied to each data set in order to register the data sets to an earth-based datum established from surveyed ground control points. Points are unclassified and ...

Estimated start date, end date, and duration of open water at a location fronting Barter Island, Alaska derived from projected sea ice extents in 4 global climate models: MIROC5, BCC-CSM1.1, INM-CM4, and GFDL-ESM2M. Starting and ending dates are when sea ice retreated or is projected to retreat offshore by more than 80 kilometers fronting Barter Island. Projected coastal storm events were derived by downscaling atmospheric conditions of the RCP 4.5 climate scenario with the MIROC5 global climate model (GCM) ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify bathymetric changes along the Florida Reef Tract (FRT) from Miami to Boca Chica Key, Florida. Changes in seafloor elevation were calculated from the 1930s to 2016 using digitized hydrographic sheet sounding data and light detection and ranging (lidar)-derived digital elevation models (DEMs) acquired by the National Oceanic and Atmospheric Administration (NOAA) in 2016 and 2017. Most of the ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Using version 52.30 of the ADvanced CIRCulation (ADCIRC) numerical model (Luettich and others, 1992), astronomic tides were simulated at Mobile Bay, Alabama (AL), under scenarios of Holocene geomorphic configurations representing the period of 3500 to 2300 years before present including a breach in the Morgan Peninsula and a land bridge at Pass aux Herons, as described in Smith and others (2020). The two-dimensional ADCIRC model can be applied to coastal and estuarine systems to solve for time-dependent ...

Using version 52.30 of the ADvanced CIRCulation (ADCIRC) numerical model (Luettich and others, 1992), astronomic tides were simulated at Mobile Bay, Alabama (AL), under scenarios of Holocene geomorphic configurations representing the period of 3500 to 2300 years before present including a breach in the Morgan Peninsula and a land bridge at Pass aux Herons, as described in Smith and others (2020). The two-dimensional ADCIRC model can be applied to coastal and estuarine systems to solve for time-dependent ...

Using version 52.30 of the ADvanced CIRCulation (ADCIRC) numerical model (Luettich and others, 1992), astronomic tides were simulated at Mobile Bay, Alabama (AL), under scenarios of Holocene geomorphic configurations representing the period of 3500 to 2300 years before present including a breach in the Morgan Peninsula and a land bridge at Pass aux Herons, as described in Smith and others (2020). The two-dimensional ADCIRC model can be applied to coastal and estuarine systems to solve for time-dependent ...

Using version 52.30 of the ADvanced CIRCulation (ADCIRC) numerical model (Luettich and others, 1992), astronomic tides were simulated at Mobile Bay, Alabama (AL), under scenarios of Holocene geomorphic configurations representing the period of 3500 to 2300 years before present including a breach in the Morgan Peninsula and a land bridge at Pass aux Herons, as described in Smith and others (2020). The two-dimensional ADCIRC model can be applied to coastal and estuarine systems to solve for time-dependent ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

Understanding how sea-level rise will affect coastal landforms and the species and habitats they support is critical for crafting approaches that balance the needs of humans and native species. Given this increasing need to forecast sea-level rise effects on barrier islands in the near and long terms, we are developing Bayesian networks to evaluate and to forecast the cascading effects of sea-level rise on shoreline change, barrier island state, and piping plover habitat availability. We use publicly ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify bathymetric changes at Looe Key near Big Pine Key, Florida (FL), within a 16.4 square-kilometer area between 2004 and 2016. USGS staff used light detection and ranging (lidar)-derived data acquired by the U.S. Army Corps of Engineers (USACE) Joint Airborne Lidar Bathymetry Technical Center of eXpertise (JALBTCX) between December 1 and 31, 2004 (USACE-JALBTCX) and the National Oceanic and ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify bathymetric changes at Looe Key near Big Pine Key, Florida (FL), within a 19.7 square-kilometer area following Hurricane Irma's landfall in September 2017. USGS staff used light detection and ranging (lidar)-derived data acquired by the National Oceanic and Atmospheric Administration (NOAA) between July 21 and November 21, 2016 and USGS multibeam data collected December 12-17, 2017 (Fredericks ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify bathymetric changes surrounding Maui, Hawaii. Changes in seafloor elevation were calculated using historical bathymetric point data from the 1960s (see Yates and others, 2017a) and light detection and ranging (lidar)-derived data acquired in 1999 (NOAA, 2013) using methods outlined in Yate and others (2017b). An elevation change analysis between the 1960s and 1999 data was performed to quantify ...

The data in this release re-map the beach and nearshore environment at Marconi Beach in Wellfleet, MA and provide updated environmental context for the 2021 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. This is related to the field activity 2024-016-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of two video cameras aimed at the beach (CoastCam CACO-02). In ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation along the Florida Reef Tract, Florida (FL). USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric Administration (NOAA) Office of Coast Survey, see Yates and others, 2017) and light ...

The data in this release re-map the beach and nearshore environment at Marconi Beach in Wellfleet, MA and provide updated environmental context for the 2021 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. This is related to the field activity 2022-014-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of CoastCam CACO-02, which are two video cameras aimed at the ...

The data in this release re-map the beach and nearshore environment at Head of the Meadow Beach in Truro, MA and provide updated environmental context for the 2020 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. This is related to the field activity 2022-015-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of CoastCam CACO-01, which are two video cameras aimed ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation along the Florida Reef Tract, Florida (FL). USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric Administration (NOAA) Office of Coast Survey, see Yates and others, 2017) and light ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation along the Florida Reef Tract, Florida (FL). USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric Administration (NOAA) Office of Coast Survey, see Yates and others, 2017) and light ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation for several sites along the Florida Reef Tract, Florida (FL) including the shallow seafloor along Key West, FL. USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric Administration (NOAA) ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation for several sites along the Florida Reef Tract, Florida (FL) including the shallow seafloor along Key West, FL. USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric Administration (NOAA) ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation for several sites along the Florida Reef Tract, Florida (FL) including the shallow seafloor along the coast of Miami, FL. USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation for several sites along the Florida Reef Tract, Florida (FL) including the shallow seafloor along the coast of Miami, FL. USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify bathymetric changes along the Florida Reef Tract (FRT) from Miami to Key West within a 982.4 square-kilometer area. USGS staff calculated changes in seafloor elevation from the 1930’s to 2016 using digitized historical hydrographic surveys (H-sheets) acquired by the U.S. Coast and Geodetic Survey (USC&GS) in the 1930’s and light detection and ranging (lidar)-derived digital elevation models ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify bathymetric changes in the Upper Florida Keys (UFK) from Triumph Reef to Pickles Reef within a 242.4 square-kilometer area. USGS staff calculated changes in seafloor elevation from 2002 to 2016 using light detection and ranging (lidar)-derived data acquired by the USGS in 2001 and 2002 and lidar-derived data acquired by the National Oceanic and Atmospheric Administration (NOAA) in 2016 and 2017. ...

These data map the beach and nearshore environment at Head of the Meadow Beach in Truro, MA, providing updated regional context for the 2019 CoastCam installation. CoastCam CACO-01 are two video cameras aimed at the beach that view the coast shared by beachgoers, shorebirds, seals, and sharks. These data were collected as part of field activity 2022-015-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region. In March 2022, U.S. Geological Survey and Woods ...

The data in this release map the beach and nearshore environment at Marconi Beach in Wellfleet, MA and provide updated environmental context for the 2021 CoastCam installation that looks out at the coast shared by beachgoers, shorebirds, seals, and sharks. This is related to the field activity 2022-014-FA and a collaboration with the National Park Service at Cape Cod National Seashore to monitor the region that falls within the field of view of CoastCam CACO-02, which are two video cameras aimed at the ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify bathymetric changes along the Florida Reef Tract (FRT) from Miami to Marquesas Keys within a 939.4 square-kilometer area between 2016 and 2019. USGS staff used light detection and ranging (lidar)-derived data acquired by the National Oceanic and Atmospheric Administration (NOAA) during two separate lidar surveys. The first is dataset is referenced as "2016 lidar" data and was collected between ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation along the Florida Reef Tract, Florida (FL). USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric Administration (NOAA) Office of Coast Survey, see Yates and others, 2017) and light ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation along the Florida Reef Tract, Florida (FL). USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric Administration (NOAA) Office of Coast Survey, see Yates and others, 2017) and light ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify the combined effect of all constructive and destructive processes on modern coral reef ecosystems by projecting future regional-scale changes in seafloor elevation for several sites along the Florida Reef Tract, Florida (FL) including the shallow seafloor along Key West, FL. USGS staff used historical bathymetric point data from the 1930's (National Oceanic and Atmospheric Administration (NOAA) ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted research to quantify bathymetric changes near Buck Island and St. Croix, U.S. Virgin Islands. Changes in seafloor elevation were calculated using historical bathymetric point data from the 1980s (see Yates and others, 2017a) and light detection and ranging (lidar)-derived data acquired in 2014 (NOAA, 2015) using methods outlined in Yates and others (2017b). An elevation change analysis between the 1980s and 2014 ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

Using version 5527 of the XBeach numerical model (Roelvink and others, 2009), barrier island morphological change was simulated at Dauphin Island, Alabama (AL), for a 30-year forecast of multiple storms and sea level rise, considering scenarios of no-action and beach and dune nourishment as described in Passeri and others (2021). The two-dimensional XBeach model can be applied to barrier islands to solve for time-dependent topography and bathymetry. The XBeach model setup requires the input of topographic ...

The model output of bathymetry and topography values resulting from a deterministic simulation at Dauphin Island, Alabama, as described in USGS Open-File Report 2019–1139 (https://doi.org/10.3133/ofr20191139), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry refer to Mickey and others (2020).

Binary point-cloud data of a portion of the submerged environs of Fort Lauderdale, Florida, were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency ...

Binary point-cloud data of a portion of the submerged environs of Fort Lauderdale, Florida, were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency ...

Binary point-cloud data of a portion of the submerged environs of Fort Lauderdale, Florida, were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency ...

Binary point-cloud data of a portion of the submerged environs of Fort Lauderdale, Florida, were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency ...

The National Assessment of Coastal Change Hazards project derives beach morphology features from lidar elevation data for the purpose of understanding and predicting storm impacts to our nation's coastlines. This dataset defines mean beach slopes along the United States Southeast Gulf of Mexico from Bradenton Beach to Clearwater Beach, Florida for data collected at various times between 1998 and 2010.

The National Assessment of Coastal Change Hazards project derives beach morphology features from lidar elevation data for the purpose of understanding and predicting storm impacts to our nation's coastlines. This dataset defines beach slopes along the United States Southeast Gulf of Mexico from Bradenton Beach to Clearwater Beach, Florida for data collected at various times between 1998 and 2010.

Hydrographic sheets (H-sheets) and nautical charts produced by the National Ocean Service (NOS) during the 1800s provide historic sounding (water depth) measurements of coastal areas. The data can be vectorized into a geographic information system (GIS), adjusted to a modern vertical datum, and converted into a digital elevation model to provide an interpretation of the historic seafloor elevation. These data were produced to provide an estimate of historical bathymetry for the Mississippi-Alabama coastal ...

Hydrographic sheets (H-sheets) and nautical charts produced by the National Ocean Service (NOS) during the 1800s provide historic sounding (water depth) measurements of coastal areas. The data can be vectorized into a geographic information system (GIS), adjusted to a modern vertical datum, and converted into a digital elevation model to provide an interpretation of the historic seafloor elevation. These data were produced to provide an estimate of historical bathymetry for the Mississippi-Alabama coastal ...

Antecedent topography is an important aspect of coastal morphology when studying and forecasting coastal change hazards. The uncertainty in morphologic response of storm-impact models and their use in short-term hazard forecasting and decadal forecasting is important to account for when considering a coupled model framework. Mickey and others (2020) provided a methodology to investigate uncertainty of profile response within the storm impact model, XBeach, related to varying antecedent topographies. A ...

The model input for the bathymetry and topography values resulting from a deterministic simulation at Dauphin Island, Alabama, as described in U.S. Geological Survey (USGS) Open-File Report 2019-1139 (https://doi.org/10.3133/ofr20191139), are provided here. For further information regarding model input generation and visualization of model output topography and bathymetry refer to Mickey and others (2020).

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

ASCII XYZ point cloud data were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over Dauphin Island, post-Hurricane Katrina (August 2005 hurricane), using the National Aeronautics and Space Administration (NASA) Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The ...

ASCII XYZ point cloud data were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over Dauphin Island, post-Hurricane Katrina (August 2005 hurricane), using the National Aeronautics and Space Administration (NASA) Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

Using the numerical model XBeach version 4926 (Roelvink and others, 2009), hurricanes Ivan (2004) and Katrina (2005) were simulated at Dauphin Island, Alabama, under present-day conditions and future sea level rise scenarios as described in Passeri and others, 2018. The XBeach model setup requires the input of a merged topographic and bathymetric digital elevation model (DEM), and inputs of wave spectra (based on significant wave height, peak wave period and wave direction) and water level (tide and surge) ...

The National Assessment of Coastal Change Hazards project derives beach morphology features from lidar elevation data for the purpose of understanding and predicting storm impacts to our nation's coastlines. This dataset defines mean beach slopes for Massachusetts for data collected at various times between 2000 and 2013.

The National Assessment of Coastal Change Hazards project derives beach morphology features from lidar elevation data for the purpose of understanding and predicting storm impacts to our nation's coastlines. This dataset defines beach slopes along the United States Northeast Atlantic Ocean for Massachusetts for data collected at various times between 2000 and 2013

Coastal marshes are highly dynamic and ecologically important ecosystems that are subject to pervasive and often harmful disturbances, including shoreline erosion. Shoreline erosion can result in an overall loss of coastal marsh, particularly in estuaries with moderate- or high-wave energy. Not only can waves be important physical drivers of shoreline change, they can also influence shore-proximal vertical accretion through sediment delivery. For these reason, estimates of wave energy can provide a ...

A topographic lidar survey was conducted July 12-14, 2013 over Dauphin Island, Alabama and Chandeleur, Stake, Grand Gosier and Breton Islands, Louisiana. Lidar data exchange format (LAS) 1.2 formatted classified point data files were generated based on these data. Photo Science, Inc. was contracted by the U.S. Geological Survey (USGS) to collect and process the lidar data. The lidar data were collected at a nominal pulse spacing (NPS) of 1.0 meter (m). The horizontal projection and datum of the data are ...

This Data Series Report contains lidar elevation data collected September 5 to October 11, 2012, for the barrier islands of Alabama, Mississippi and southeast Louisiana, including the coast near Port Fourchon. Most of the data were collected September 5-10, 2012, with a reflight conducted on October 11, 2012, to increase point density in some areas. Lidar data exchange format (LAS) 1.2 formatted point data files were generated based on these data. The point cloud data were processed to extract bare earth ...

This Data Series Report contains lidar elevation data collected February 6, 2012, over the Chandeleur Islands, Louisiana. LAS 1.2 formatted point data files were generated based on these data. The point cloud data were processed to extract bare earth data; therefore, the point cloud data are classified into only these classes: 1 and 17-unclassified, 2-ground, 9-water, and 10-breakline proximity. Digital Aerial Solutions, LLC, was contracted by the USGS to collect and process these data. The lidar data were ...

The National Assessment of Coastal Change Hazards project derives features of beach morphology from lidar elevation data for the purpose of understanding and predicting storm impacts to our nation's coastlines. This dataset defines mean beach slopes along the United States Southeast Atlantic Ocean from Salvo to Duck, North Carolina for data collected at various times between 1996 and 2012.

The National Assessment of Coastal Change Hazards project derives features of beach morphology from lidar elevation data for the purpose of understanding and predicting storm impacts to our nation's coastlines. This dataset defines beach slopes along the United States Southeast Atlantic Ocean from Salvo to Duck, North Carolina for data collected at various times between 1996 and 2012.

The National Assessment of Coastal Change Hazards project derives beach morphology features from lidar elevation data for the purpose of understanding and predicting storm impacts to our nation's coastlines. This dataset defines mean beach slopes for New Jersey for data collected at various times between 2007 and 2014.

The National Assessment of Coastal Change Hazards project derives beach morphology features from lidar elevation data for the purpose of understanding and predicting storm impacts to our nation's coastlines. This dataset defines beach slopes along the United States Northeast Atlantic Ocean for New Jersey for data collected at various times between 2007 and 2014

Lidar is a remote sensing technique that uses laser light to detect, range, or identify remote objects based on light reflected by the object or emitted through it subsequent fluorescence. Airborne ranging lidar is now being applied in coastal environments to produce accurate, cost-efficient elevation datasets with high data density. The USGS in cooperation with NASA and NPS is using airborne lidar to measure the submerged topography of the north Florida reef tract; secondarily, the data will be assessed ...

Lidar is a remote sensing technique that uses laser light to detect, range, or identify remote objects based on light reflected by the object or emitted through it subsequent fluorescence. Airborne ranging lidar is now being applied in coastal environments to produce accurate, cost-efficient elevation datasets with high data density. The USGS in cooperation with NASA and NPS is using airborne lidar to measure the submerged topography of the Dry Tortugas reef tract and Subaerail topography of land features ...

A bare earth elevation map (also known as a Digital Elevation Model or DEM) of Fire Island National Seashore was produced from remotely-sensed, geographically-referenced elevation measurements in cooperation with the U.S. Geological Survey (USGS), National Air and Space Administration (NASA), and the National Park Service (NPS). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft ...

A first return elevation map (also known as a Digital Elevation Model or DEM) of Fire Island National Seashore was produced from remotely-sensed, geographically-referenced elevation measurements in cooperation with the U.S. Geological Survey (USGS), National Air and Space Administration (NASA), and the National Park Service (NPS). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft ...

LiDAR is a remote sensing technique that uses laser light to detect, range, or identify remote objects based on light reflected by the object or emitted through it subsequent fluorescence. Airborne ranging LiDAR is now being applied in coastal environments to produce accurate, cost-efficient elevation datasets with high data density. The USGS in cooperation with NASA and NPS is using airborne LiDAR to measure the topography of Assateague Island National Seashore land features. Elevation measurements were ...

A first surface elevation map (also known as a Digital Elevation Model or DEM) of Thomas Stone National Historic Site was produced from remotely-sensed, geographically-referenced elevation measurements in cooperation with the U.S. Geological Survey (USGS), National Air and Space Administration (NASA), and the National Park Service (NPS). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an ...

A bare earth elevation map (also known as a Digital Elevation Model or DEM) of Gateway National Recreation Area was produced from remotely-sensed, geographically-referenced elevation measurements in cooperation with the U.S. Geological Survey (USGS), National Air and Space Administration (NASA), and the National Park Service (NPS). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an ...

A bare earth elevation map (also known as a Digital Elevation Model or DEM) of George Washington Birthplace National Monument was produced from remotely-sensed, geographically-referenced elevation measurements in cooperation with the U.S. Geological Survey (USGS), the National Air and Space Administration (NASA), and the National Park Service (NPS). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted ...

Elevation maps (also known as Digital Elevation Models or DEMs) of Cape Cod National Seashore were produced from remotely-sensed, geographically-referenced elevation measurements in cooperation with NASA and NPS. Point data in ascii text files were interpolated in a GIS to create a grid or digital elevation model (DEM) of each beach surface. Elevation measurements were collected in Massachusetts, over Cape Cod National Seashore using the NASA Experimental Advanced Airborne Research LiDAR (EAARL), a pulsed ...

Abstract: Elevation maps (also known as Digital Elevation Models or DEMs) of Gulf Islands National Seashore were produced from remotely-sensed, geographically-referenced elevation measurements in cooperation with NASA and NPS. Point data in ascii text files were interpolated in a GIS to create a grid or digital elevation model (DEM) of each beach surface. Elevation measurements were collected in Florida, Mississippi and Texas, over Gulf Islands National Seashore, using the NASA Experimental Advanced ...

Elevation maps (also known as Digital Elevation Models or DEMs) of the Sagamore Hill National Historic Site were produced from remotely-sensed, geographically-referenced elevation measurements in cooperation with NASA and NPS. Point data in ascii text files were interpolated in a GIS to create a grid or digital elevation model (DEM) of each beach surface. Elevation measurements were collected in New York, over the Sagamore Hill National Historic Site using the NASA Experimental Advanced Airborne Research ...

Lidar is a remote sensing technique that uses laser light to detect, range, or identify remote objects based on light reflected by the object or emitted through its subsequent fluorescence. Airborne ranging Lidar is now being applied in coastal environments to produce accurate, cost-efficient elevation datasets with high spatial density. The USGS in cooperation with NASA, NOAA, and NPS is using airborne Lidar to measure the submerged topography of the northern Florida reef tract; secondarily, the data will ...

Bathymetric survey data were collected in April 2009 just south of Dumbarton Bridge in south San Francisco Bay, California. Portions of the main channel and western shallows/intertidal mudflats were surveyed using an interferometric sidescan sonar system following procedures detailed in Foxgrover and others, 2011. The bathymetry is provided as a 1-m resolution raster in geoTIFF format, referenced to the vertical datum of mean lower low water (MLLW). To convert to the North American Vertical Datum of 1988 ...

Elevation maps (also known as Digital Elevation Models or DEMs) of Padre Island National Seashore were produced from remotely-sensed, geographically-referenced elevation measurements in cooperation with NASA and NPS. Point data in ascii text files were interpolated in a GIS to create a grid or digital elevation model (DEM) of each beach surface. Elevation measurements were collected in Texas, over Padre Island National Seashore, using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed ...

Lidar is a remote sensing technique that uses laser light to detect, range, or identify remote objects based on light reflected by the object or emitted through its subsequent fluorescence. Airborne ranging lidar is now being applied in coastal environments to produce accurate, cost-efficient elevation datasets with high spatial density. The USGS, in cooperation with NASA and NPS, is using airborne lidar to measure the submerged topography of the Northern Florida Keys Reef Tract (NFKRT); secondarily, the ...

Elevation maps (also known as Digital Elevation Models or DEMs) of Colonial National Historical Park were produced from remotely-sensed, geographically-referenced elevation measurements in cooperation with NASA and NPS. Point data in ASCII text files were interpolated in a GIS to create a grid or digital elevation model (DEM) of each surface. Elevation measurements were collected in Virginia, over Colonial National Historical Park, using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

Coastal marshes are highly dynamic and ecologically important ecosystems that are subject to pervasive and often harmful disturbances, including shoreline erosion. Shoreline erosion can result in an overall loss of coastal marsh, particularly in estuaries with moderate- or high-wave energy. Not only can waves be important physical drivers of shoreline change, they can also influence shore-proximal vertical accretion through sediment delivery. For these reason, estimates of wave energy can provide a ...

The National Assessment of Coastal Change Hazards project derives beach morphology features from lidar elevation data for the purpose of understanding and predicting storm impacts to our nation's coastlines. This dataset defines mean beach slopes along the United States Southeast Atlantic Ocean from Miami to Jupiter, Florida for data collected at various times between 1999 and 2009.

The National Assessment of Coastal Change Hazards project derives beach morphology features from lidar elevation data for the purpose of understanding and predicting storm impacts to our nation's coastlines. This dataset defines beach slopes along the United States Southeast Atlantic Ocean from Miami to Jupiter, Florida for data collected at various times between 1999 and 2009.

The United States Geological Survey Saint Petersburg Coastal and Marine Science Center (USGS SPCMSC), in cooperation with the United States Army Corps of Engineers (USACE) conducted bathymetric surveys of the nearshore waters surrounding Ship and Horn Islands, Gulf Islands National Seashore, Mississippi (GUIS). Camille Cut separates Ship Island into East Ship Island and West Ship Island. The objective of this study was to establish base-level elevation conditions around West Ship Island, East Ship Island, ...

Binary point-cloud data for part of the Suncook River in New Hampshire were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey, in cooperation with the New Hampshire Geological Survey. Elevation measurements were collected over the area on November 5 and 6, 2013 using the second-generation Experimental Advanced Airborne Research Lidar, a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and ...

ASCII XYZ point cloud data for a portion of the submerged environs of Saint Thomas, U.S. Virgin Islands, was produced from remotely sensed, geographically referenced elevation measurements collected on March 7, 8, 11, 12, 13, 14, 17, 18, and 24, 2014 by the U.S. Geological Survey, in collaboration with the National Oceanic and Atmospheric Administration (NOAA) Coral Reef Conservation Program. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne ...

Using version 52.30 of the ADvanced CIRCulation (ADCIRC) numerical model (Luettich and others, 1992), astronomic tides were simulated at Mobile Bay, Alabama (AL), under scenarios of Holocene geomorphic configurations representing the period of 3500 to 2300 years before present including a breach in the Morgan Peninsula and a land bridge at Pass aux Herons, as described in Smith and others (2020). The two-dimensional ADCIRC model can be applied to coastal and estuarine systems to solve for time-dependent ...

Using version 52.30 of the ADvanced CIRCulation (ADCIRC) numerical model (Luettich and others, 1992), astronomic tides were simulated at Mobile Bay, Alabama (AL), under scenarios of Holocene geomorphic configurations representing the period of 3500 to 2300 years before present including a breach in the Morgan Peninsula and a land bridge at Pass aux Herons, as described in Smith and others (2020). The two-dimensional ADCIRC model can be applied to coastal and estuarine systems to solve for time-dependent ...

Using version 52.30 of the ADvanced CIRCulation (ADCIRC) numerical model (Luettich and others, 1992), astronomic tides were simulated at Mobile Bay, Alabama (AL), under scenarios of Holocene geomorphic configurations representing the period of 3500 to 2300 years before present including a breach in the Morgan Peninsula and a land bridge at Pass aux Herons, as described in Smith and others (2020). The two-dimensional ADCIRC model can be applied to coastal and estuarine systems to solve for time-dependent ...

Using version 52.30 of the ADvanced CIRCulation (ADCIRC) numerical model (Luettich and others, 1992), astronomic tides were simulated at Mobile Bay, Alabama (AL), under scenarios of Holocene geomorphic configurations representing the period of 3500 to 2300 years before present including a breach in the Morgan Peninsula and a land bridge at Pass aux Herons, as described in Smith and others (2020). The two-dimensional ADCIRC model can be applied to coastal and estuarine systems to solve for time-dependent ...

Using version 52.30 of the ADvanced CIRCulation (ADCIRC) numerical model (Luettich and others, 1992), astronomic tides were simulated at Mobile Bay, Alabama (AL), under scenarios of Holocene geomorphic configurations representing the period of 3500 to 2300 years before present including a breach in the Morgan Peninsula and a land bridge at Pass aux Herons, as described in Smith and others (2020). The two-dimensional ADCIRC model can be applied to coastal and estuarine systems to solve for time-dependent ...

Using version 52.30 of the ADvanced CIRCulation (ADCIRC) numerical model (Luettich and others, 1992), astronomic tides were simulated at Mobile Bay, Alabama (AL), under scenarios of Holocene geomorphic configurations representing the period of 3500 to 2300 years before present including a breach in the Morgan Peninsula and a land bridge at Pass aux Herons, as described in Smith and others (2020). The two-dimensional ADCIRC model can be applied to coastal and estuarine systems to solve for time-dependent ...

Using version 52.30 of the ADvanced CIRCulation (ADCIRC) numerical model (Luettich and others, 1992), astronomic tides were simulated at Mobile Bay, Alabama (AL), under scenarios of Holocene geomorphic configurations representing the period of 3500 to 2300 years before present including a breach in the Morgan Peninsula and a land bridge at Pass aux Herons, as described in Smith and others (2020). The two-dimensional ADCIRC model can be applied to coastal and estuarine systems to solve for time-dependent ...

Using version 52.30 of the ADvanced CIRCulation (ADCIRC) numerical model (Luettich and others, 1992), astronomic tides were simulated at Mobile Bay, Alabama (AL), under scenarios of Holocene geomorphic configurations representing the period of 3500 to 2300 years before present including a breach in the Morgan Peninsula and a land bridge at Pass aux Herons, as described in Smith and others (2020). The two-dimensional ADCIRC model can be applied to coastal and estuarine systems to solve for time-dependent ...

Elevation maps (also known as Digital Elevation Models or DEMs) of Gulf Islands National Seashore were produced from remotely-sensed, geographically-referenced elevation measurements in cooperation with NASA and NPS. Point data in ascii text files were interpolated in a GIS to create a grid or digital elevation model (DEM) of each beach surface. Elevation measurements were collected in Florida, Mississippi and Texas, over Gulf Islands National Seashore, using the NASA Experimental Advanced Airborne Research ...

Bathymetric survey data were collected in April 2013 just south of Dumbarton Bridge in south San Francisco Bay, California. A portion of the main channel was surveyed using an interferometric sidescan sonar system following procedures detailed in Foxgrover and others, 2011. The bathymetry is provided as a 1-m resolution raster in geoTIFF format, referenced to the vertical datum of mean lower low water (MLLW). To convert to the North American Vertical Datum of 1988 (NAVD88), subtract a static offset of 0.37 ...

Bathymetric survey data were collected in April 2016 just south of Dumbarton Bridge in south San Francisco Bay, California. A portion of the main channel was surveyed using an interferometric sidescan sonar system following procedures detailed in Foxgrover and others, 2011. The bathymetry is provided as a 1-m resolution raster in geoTIFF format, referenced to the vertical datum of mean lower low water (MLLW). To convert to the North American Vertical Datum of 1988 (NAVD88), subtract a static offset of 0.37 ...

Bathymetric survey data were collected in April 2018 just south of Dumbarton Bridge in south San Francisco Bay, California. A portion of the main channel was surveyed using an interferometric sidescan sonar system following procedures detailed in Foxgrover and others, 2011. The bathymetry is provided as a 1-m resolution raster in geoTIFF format, referenced to the vertical datum of mean lower low water (MLLW). To convert to the North American Vertical Datum of 1988 (NAVD88), subtract a static offset of 0.37 ...

Bathymetric survey data were collected in December 2008 just south of Dumbarton Bridge in south San Francisco Bay, California. Portions of the main channel and western shallows/intertidal mudflats were surveyed using an interferometric sidescan sonar system following procedures detailed in Foxgrover and others, 2011. The bathymetry is provided as a 1-m resolution raster in geoTIFF format, referenced to the vertical datum of mean lower low water (MLLW). To convert to the North American Vertical Datum of 1988 ...

Bathymetric survey data were collected in February 2009 just south of Dumbarton Bridge in south San Francisco Bay, California. Portions of the main channel and western shallows/intertidal mudflats were surveyed using an interferometric sidescan sonar system following procedures detailed in Foxgrover and others, 2011 . The bathymetry is provided as a 1-m resolution raster in geoTIFF format, referenced to the vertical datum of mean lower low water (MLLW). To convert to the North American Vertical Datum of ...

Bathymetric survey data were collected in January 2010 just south of Dumbarton Bridge in south San Francisco Bay, California. Portions of the main channel and western shallows/intertidal mudflats were surveyed using an interferometric sidescan sonar system following procedures detailed in Foxgrover and others, 2011. The bathymetry is provided as a 1-m resolution raster in geoTIFF format, referenced to the vertical datum of mean lower low water (MLLW). To convert to the North American Vertical Datum of 1988 ...

Bathymetric survey data were collected in January 2011 just south of Dumbarton Bridge in south San Francisco Bay, California. Portions of the main channel and western shallows/intertidal mudflats were surveyed using an interferometric sidescan sonar system following procedures detailed in Foxgrover and others, 2011. The bathymetry is provided as a 1-m resolution raster in geoTIFF format, referenced to the vertical datum of mean lower low water (MLLW). To convert to the North American Vertical Datum of 1988 ...

Bathymetric survey data were collected in March 2010 just south of Dumbarton Bridge in south San Francisco Bay, California. Portions of the main channel and western shallows/intertidal mudflats were surveyed using an interferometric sidescan sonar system following procedures detailed in Foxgrover and others, 2011. The bathymetry is provided as a 1-m resolution raster in geoTIFF format, referenced to the vertical datum of mean lower low water (MLLW). To convert to the North American Vertical Datum of 1988 ...

Bathymetric survey data were collected in March 2019 just south of Dumbarton Bridge in south San Francisco Bay, California. A portion of the main channel was surveyed using an interferometric sidescan sonar system following procedures detailed in Foxgrover and others, 2011. The bathymetry is provided as a 1-m resolution raster in geoTIFF format, referenced to the vertical datum of mean lower low water (MLLW). To convert to the North American Vertical Datum of 1988 (NAVD88), subtract a static offset of 0.37 ...

Bathymetric survey data were collected in November 2013 just south of Dumbarton Bridge in south San Francisco Bay, California. Portions of the main channel and western shallows/intertidal mudflats were surveyed using an interferometric sidescan sonar system following procedures detailed in Foxgrover and others, 2011. The bathymetry is provided as a 1-m resolution raster in geoTIFF format, referenced to the vertical datum of mean lower low water (MLLW). To convert to the North American Vertical Datum of 1988 ...

Bathymetric survey data were collected in October 2009 just south of Dumbarton Bridge in south San Francisco Bay, California. Portions of the main channel and western shallows/intertidal mudflats were surveyed using an interferometric sidescan sonar system following procedures detailed in Foxgrover and others, 2011. The bathymetry is provided as a 1-m resolution raster in geoTIFF format, referenced to the vertical datum of mean lower low water (MLLW). To convert to the North American Vertical Datum of 1988 ...

Bathymetric survey data were collected in October 2014 just south of Dumbarton Bridge in south San Francisco Bay, California. A portion of the main channel was surveyed using an interferometric sidescan sonar system following procedures detailed in Foxgrover and others, 2011. The bathymetry is provided as a 1-m resolution raster in geoTIFF format, referenced to the vertical datum of mean lower low water (MLLW). To convert to the North American Vertical Datum of 1988 (NAVD88), subtract a static offset of 0 ...

Bathymetric survey data were collected in October 2015 just south of Dumbarton Bridge in south San Francisco Bay, California. Portions of the main channel and western shallows/intertidal mudflats were surveyed using an interferometric sidescan sonar system following procedures detailed in Foxgrover and others, 2011. The bathymetry is provided as a 1-m resolution raster in geoTIFF format, referenced to the vertical datum of mean lower low water (MLLW). To convert to the North American Vertical Datum of 1988 ...

Bathymetric survey data were collected in October 2016 just south of Dumbarton Bridge in south San Francisco Bay, California. A portion of the main channel was surveyed using an interferometric sidescan sonar system following procedures detailed in Foxgrover and others, 2011. The bathymetry is provided as a 1-m resolution raster in geoTIFF format, referenced to the vertical datum of mean lower low water (MLLW). To convert to the North American Vertical Datum of 1988 (NAVD88), subtract a static offset of 0 ...

Bathymetric survey data were collected in September 2010 just south of Dumbarton Bridge in south San Francisco Bay, California. Portions of the main channel and western shallows/intertidal mudflats were surveyed using an interferometric sidescan sonar system following procedures detailed in Foxgrover and others, 2011. The bathymetry is provided as a 1-m resolution raster in geoTIFF format, referenced to the vertical datum of mean lower low water (MLLW). To convert to the North American Vertical Datum of ...

This data release presents structure-from-motion (SFM) products derived from aerial imagery surveys with precise Global Navigation Satellite System (GNSS) navigation data flown in a piloted fixed wing aircraft taken along the North Carolina coast in response to Hurricane Florence (available here https://coastal.er.usgs.gov/data-release/doi-P91KB9SF/). USGS researchers use the elevation models and orthorectified imagery to assess future coastal vulnerability, nesting habitats for wildlife, and provide data ...

This portion of the USGS data release presents gridded bathymetry data derived from repeated bathymetric surveys conducted by the U.S. Army Corps of Engineers Portland District on the Pacific Ocean, Washington. Repeated surveys were performed between September 9, 2020, and March 10, 2021, from a vessel equipped with a multi-beam bathymetry system to characterize the morphology and dispersal of a nearshore berm composed of sediment dredged from the navigational channel at the mouth of the Columbia River. ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

Using version 20.1_19 of the Discontinuous-Galerkin Shallow Water Equations Model (DG-SWEM) (Kubatko and others, 2006), astronomic tides and salinity transport were simulated at Grand Bay, Alabama (AL), under scenarios of interior headland restoration and sea level rise, as described in Passeri and others (2023). The two-dimensional DG-SWEM model can be applied to coastal and estuarine systems to solve for time-dependent hydrodynamic circulation and salinity transport. The DG-SWEM model uses the ADCIRC ...

U.S. Geological Survey (USGS) staff created geographic information system (GIS) footprints to show the extent of light detection and ranging (lidar) datasets published by the USGS St. Petersburg Coastal and Marine Science Center (SPCMSC), since 2001. These lidar datasets were published as LAS, XYZ, or Digital Elevation Model (DEM) outputs of coastal, submerged and/or terrestrial topography in USGS Data Series (DS), Open-File Reports (OFR), and data releases (DR). Please see the publications listed in the ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The effects of interior headland restoration on estuarine sediment transport processes are assessed through process-based numerical modeling. Three proposed interior headland restoration scenarios in the Grand Bay estuary (Mississippi/Alabama) are modeled using Delft3D (developed by Deltares) to understand impacts on suspended sediment concentrations, bed level morphology and sediment fluxes under present-day conditions and a sea level rise of 0.5 meters (m). Delft3D model output of suspended sediment ...

The objectives of the survey were to provide bathymetric and sidescan sonar data for sediment transport studies and coastal change model development for ongoing studies of nearshore coastal dynamics along Sandwich Town Neck Beach, MA. Data collection equipment used for this investigation are mounted on an unmanned surface vehicle (USV) uniquely adapted from a commercially sold gas-powered kayak and termed the "jetyak". The jetyak design is the result of a collaborative effort between USGS and Woods Hole ...

This 25-m-resolution surface presents bathymetric change of Central San Francisco Bay, California (hereafter referred to as Central Bay). This surface compares a 1-m-resolution digital elevation model (DEM) of the central portion of San Francisco Bay (Fregoso and others, 2020), comprised of bathymetry data in the Central Bay region from the time period referred to as the 2010s because the majority of the surveys were in that decade, to a 25-m-resolution DEM of Central Bay comprised of historic surveys from ...

This 25-m-resolution surface presents bathymetric change of San Pablo Bay, California, from 1983 to 2015. This surface compares a 1-m-resolution digital elevation model (DEM) of the northern portion of San Francisco Bay (Fregoso and others, 2020), comprised of bathymetry data in the San Pablo Bay region from the time period referred to as the 2010s because the majority of the surveys were in that decade, to a 25-m-resolution bathymetric DEM of San Pablo Bay comprised of historic surveys from 1983 to 1986 ...

This 50-m-resolution surface presents bathymetric change of South San Francisco Bay, California (hereafter referred to as South Bay). This surface compares a 1-m-resolution digital elevation model (DEM) of the southern portion of San Francisco Bay (Fregoso and others, 2020), comprised of bathymetry data in the South Bay region from the time period referred to as the 2010s because the majority of the surveys were in that decade, to a 50-m-resolution DEM of South Bay comprised of historic surveys from 1979 to ...

This 25-m-resolution surface presents bathymetric change of Suisun Bay, California, from 1988 to 2016. This surface compares a 1-m-resolution digital elevation model (DEM) of the northern portion of San Francisco Bay (Fregoso and others, 2020), comprised of bathymetry data in the Suisun region from the time period referred to as the 2010s because the majority of the surveys were in that decade, to a 25-m-resolution bathymetric DEM of Suisun Bay comprised of historic surveys from 1988 to 1990 (referred to as ...

ASCII XYZ point cloud data were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area using the National Aeronautics and Space Administration (NASA) Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency laser beams directed at the ...

ASCII XYZ point cloud data were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area using the National Aeronautics and Space Administration (NASA) Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency laser beams directed at the ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) and the USGS Lower Mississippi-Gulf Water Science Center (LMG WSC) in Montgomery, Alabama, collected terrestrial-based light detection and ranging (T-lidar) elevation data at Fire Island, New York. The data were collected on May 18, 2015 as part of the ongoing beach monitoring within Hurricane Sandy Supplemental Project GS2-2B, and will be used to document and assess the morphological storm response and post-storm ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) and the USGS Lower Mississippi-Gulf Water Science Center (LMG WSC) in Montgomery, Alabama, collected terrestrial-based light detection and ranging (T-lidar) elevation data at Fire Island, New York. The data were collected on May 18, 2015 as part of the ongoing beach monitoring within Hurricane Sandy Supplemental Project GS2-2B, and will be used to document and assess the morphological storm response and post-storm ...

ASCII XYZ point cloud data for a portion of the environs of Anegada, British Virgin Islands, was produced from remotely sensed, geographically referenced elevation measurements collected March 19-20, 2014 by the U.S. Geological Survey. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The ...

Binary point-cloud data were produced for Assateague Island, Maryland and Virginia, post-Hurricane Joaquin, from remotely sensed, geographically referenced elevation measurements collected by Quantum Spatial using a Leica ALS70 (1064-nm wavelength) lidar sensor.

A bare-earth topography Digital Elevation Model (DEM) mosaic for the Beaumont and Lower Neches River Units of Big Thicket National Preserve in Texas, was produced from remotely sensed, geographically referenced elevation measurements collected on January 11, 15, 17, 18, 19, 21, 22, 23, 25, 26, 27, and 29, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced ...

A first-surface topography Digital Elevation Model (DEM) mosaic for the Beaumont and Lower Neches River Units of Big Thicket National Preserve in Texas, was produced from remotely sensed, geographically referenced elevation measurements collected on January 11, 15, 17, 18, 19, 21, 22, 23, 25, 26, 27, and 29, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental ...

A bare-earth topography Digital Elevation Model (DEM) mosaic for the Big Sandy Creek Corridor Unit of Big Thicket National Preserve in Texas was produced from remotely sensed, geographically referenced elevation measurements collected on January 19, 21, 22, 29, and 30, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), a ...

A first-surface topography Digital Elevation Model (DEM) mosaic for the Big Sandy Creek Corridor Unit of Big Thicket National Preserve in Texas was produced from remotely sensed, geographically referenced elevation measurements collected on January 19, 21, 22, 29, and 30, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B) ...

A bare-earth topography digital elevation model (DEM) mosaic for the Big Sandy Creek Unit of Big Thicket National Preserve in Texas, was produced from remotely sensed, geographically referenced elevation measurements collected on January 19, 21, 22, and 30, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar, a pulsed laser ranging ...

A first-surface topography digital elevation model (DEM) mosaic for the Big Sandy Creek Unit of Big Thicket National Preserve in Texas, was produced from remotely sensed, geographically referenced elevation measurements collected on January 19, 21, 22, and 30, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar, a pulsed laser ...

A bare-earth topography Digital Elevation Model (DEM) mosaic for the Lance Rosier Unit of Big Thicket National Preserve in Texas, was produced from remotely sensed, geographically referenced elevation measurements collected on January 15, 21, 22, 25, 26, and 30, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), a pulsed ...

A first-surface topography Digital Elevation Model (DEM) mosaic for the Lance Rosier Unit of Big Thicket National Preserve in Texas, was produced from remotely sensed, geographically referenced elevation measurements collected on January 15, 21, 22, 25, 26, and 30, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), a ...

A bare-earth topography Digital Elevation Model (DEM) mosaic for the Lower Neches River Corridor Unit of Big Thicket National Preserve in Texas was produced from remotely sensed, geographically referenced elevation measurements collected on January 11, 15, 17, 18, 19, 21, 23, 25, 27, and 29, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne ...

A first-surface topography Digital Surface Model (DSM) mosaic for the Lower Neches River Corridor Unit of Big Thicket National Preserve in Texas was produced from remotely sensed, geographically referenced elevation measurements collected on January 11, 15, 17, 18, 19, 21, 23, 25, 27, and 29, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne ...

A bare-earth topography Digital Elevation Model (DEM) mosaic for the Menard Corridor Unit of Big Thicket National Preserve in Texas was produced from remotely sensed, geographically referenced elevation measurements collected on January 21 and 22, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), a pulsed laser ranging ...

A first-surface topography Digital Surface Model (DSM) mosaic for the Menard Corridor Unit of Big Thicket National Preserve in Texas was produced from remotely sensed, geographically referenced elevation measurements collected on January 21 and 22, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), a pulsed laser ranging ...

A bare-earth topography Digital Elevation Model (DEM) mosaic for the Neches Bottom and Jack Lore Baygall Unit of Big Thicket National Preserve in Texas, was produced from remotely sensed, geographically referenced elevation measurements collected on January 11, 15, 17, 18, 21, 23, 25, and 29, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne ...

A first-surface topography Digital Elevation Model (DEM) mosaic for the Neches Bottom and Jack Lore Baygall Unit of Big Thicket National Preserve in Texas, was produced from remotely sensed, geographically referenced elevation measurements collected on January 11, 15, 17, 18, 21, 23, 25, and 29, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne ...

A bare-earth topography digital elevation model (DEM) mosaic for the Turkey Creek Unit of Big Thicket National Preserve in Texas, was produced from remotely sensed, geographically referenced elevation measurements collected on January 19, 21, 22, 25, 26, and 29, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), a pulsed ...

A first-surface topography digital elevation model (DEM) mosaic for the Turkey Creek Unit of Big Thicket National Preserve in Texas, was produced from remotely sensed, geographically referenced elevation measurements collected on January 19, 21, 22, 25, 26, and 29, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), a ...

A bare-earth topography Digital Elevation Model (DEM) mosaic for the Village Creek Corridor Unit of Big Thicket National Preserve in Texas was produced from remotely sensed, geographically referenced elevation measurements collected on January 19, 21, 22, 23, 26, 27, and 29, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL ...

A first-surface topography Digital Surface Model (DSM) mosaic for the Village Creek Corridor Unit of Big Thicket National Preserve in Texas was produced from remotely sensed, geographically referenced elevation measurements collected on January 19, 21, 22, 23, 26, 27, and 29, 2014 by the U.S. Geological Survey, in cooperation with the National Park Service - Gulf Coast Network. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar ...

This dataset contains binary point-cloud data, produced from remotely sensed, geographically referenced topobathymetric measurements collected by Photo Science, Inc., encompassing the Breton and Gosier Island, LA study areas. The original area of interest was buffered by 100 meters to ensure complete coverage, resulting in approximately 75 square miles of lidar data. The Breton Island Lidar project called for the planning, acquisition, processing, and derivative products of topobathymetric lidar data, ...

As a part of the Barrier Island Comprehensive Monitoring Program (BICM), scientists from the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted a nearshore single-beam bathymetry survey along the Chenier Plain, Louisiana from Marsh Island to Sabine Pass. The goal of the BICM program is to provide long-term data on Louisiana's coastline and use this data to plan, design, evaluate, and maintain current and future barrier island restoration projects. The data described in ...

ASCII XYZ point cloud data for a portion of the submerged environs of Crocker Reef, Florida, were produced from remotely sensed, geographically referenced elevation measurements collected on April 13 and 22, 2014 by the U.S. Geological Survey. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. ...

A submerged topography digital elevation model (DEM) mosaic for a portion of the submerged environs of Crocker Reef, Florida, was produced from remotely sensed, geographically referenced elevation measurements collected on April 13 and 22, 2014 by the U.S. Geological Survey. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation ...

Derived products of a portion of the New York, Delaware, Maryland, Virginia, and North Carolina coastlines, post-Hurricane Sandy (Sandy was an October 2012 hurricane that made landfall as an extratropical cyclone on the 29th), were produced by the U.S. Geological Survey (USGS) from remotely sensed, geographically referenced elevation measurements collected by Photo Science, Inc. (Delaware, Maryland, Virgina, and North Carolina) and Woolpert, Inc. (Fire Island, New York) using airborne lidar sensors. Post ...

Dune features (dune crest and toe elevations) and mean-high-water shoreline data for a portion of the New York, Delaware, Maryland, Virginia, and North Carolina coastlines, post-Hurricane Sandy (Sandy was an October 2012 hurricane that made landfall as an extratropical cyclone on the 29th), were produced by the U.S. Geological Survey (USGS) from remotely sensed, geographically referenced elevation measurements collected by Photo Science and Woolpert using using airborne lidar sensors. Binary point-cloud ...

American Standard Code Information Interchange XYZ and binary point-cloud data, as well as a seamless (bare-earth and submerged) digital elevation model for part of Fire Island, New York, pre-Hurricane Sandy (October 2012 hurricane), were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar, a pulsed laser ranging system ...

This shapefile was produced from 53 2-kilometer by 2-kilometer tile extents of remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar, a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency laser beams directed at the Earth's surface ...

ASCII XYZ data for Fire Island, New York, was produced from remotely sensed, geographically referenced elevation measurements collected October 25 and November 8, 2002 by the U.S. Geological Survey, in cooperation with the National Park Service (NPS) and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the first-generation Experimental Advanced Airborne Research Lidar (EAARL-A), a pulsed laser ranging system mounted onboard an aircraft to ...

Binary point-cloud data were produced for Long Island, New York, from remotely sensed, geographically referenced elevation measurements collected by Woolpert, Inc. using an Leica ALS50-II lidar sensor flown on a Cessna 404 aircraft. These data were collected post-Hurricane Irene on August 30, 2011.

A digital elevation model (DEM) mosaic was produced for Long Island, New York, from remotely sensed, geographically referenced elevation measurements collected by Woolpert, Inc. using an Leica ALS50-II lidar sensor flown on a Cessna 404 aircraft. These data were collected post-Hurricane Irene on August 30, 2011.

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The sensitivity to sediment parameterization and initial bed configuration on sediment transport processes and morphological evolution are assessed through process-based numerical modeling. Six sensitivity cases using a previously validated model for Dauphin Island, Alabama were modeled using Delft3D (developed by Deltares) to understand impacts on bed level morphology, barrier island evolution, and sediment fluxes. Delft3D model output of suspended and bedload sediment fluxes, and final bed levels data are ...

This data release contains bathymetry and topography data from surveys performed on the Elwha River delta between 2010 and 2017. Sediment grain-size data are available for selected surveys performed after May 2012. This data release will be updated as additional bathymetry, topography, and surface-sediment grain-size data from future surveys become available.

This data release provides a series of four bathymetric change grids generated from historical bathymetric surveys collected in central San Francisco Bay, CA from the 1855 to 1979. The National Ocean Service (NOS) and its predecessor, the United States Coast and Geodetic Survey, collected hydrographic surveys in 1855, 1895, 1920, 1947, and 1979. Surface modeling software was used to generate bathymetric DEMs of each of these surveys. The bathymetric DEMs were then adjusted to account for gridding ...

This data release provides a series of five bathymetric digital elevation models (DEMs) of central San Francisco Bay, CA generated from single-beam hydrographic surveys collected from 1855 to 1979. The DEMs were constructed based upon historical United States Coast and Geodetic Survey and National Ocean Service (NOS) surveys collected in 1855, 1895, 1920, 1947, and 1979. Depth soundings from the pre-1930s surveys were manually digitized and georeferenced while the later surveys were obtained in digital ...

This data release provides a series of five bathymetric change grids generated from historical bathymetric surveys collected in San Pablo Bay, CA from the 1856 to 1983. The National Ocean Service (NOS) and its predecessor, the United States Coast and Geodetic Survey, collected hydrographic surveys in 1856, 1887, 1898, 1922, 1951, and 1983. Surface modeling software was used to generate bathymetric DEMs of each of these surveys. The bathymetric DEMs were then adjusted to account for gridding interpolation ...

This data release provides a series of six bathymetric digital elevation models (DEMs) of San Pablo Bay, CA generated from single-beam hydrographic surveys collected from 1856 to 1983. The DEMs were constructed based upon historical United States Coast and Geodetic Survey and National Ocean Service (NOS) surveys collected in 1856, 1887, 1898, 1922, 1951, and 1983. Depth soundings from the pre-1930s surveys were manually digitized and georeferenced while the later surveys were obtained in digital format, and ...

This data release provides a series of five bathymetric change grids generated from historical bathymetric surveys collected in south San Francisco Bay, CA from the 1858 to 2005. The National Ocean Service (NOS) and its predecessor, the United States Coast and Geodetic Survey, collected hydrographic surveys in 1858, 1898, 1931, 1956, and 1983 plus Sea Surveyor, Inc. collected a survey in 2005. Surface modeling software was used to generate bathymetric DEMs of each of these surveys. The bathymetric DEMs were ...

This data release provides a series of six bathymetric digital elevation models (DEMs) of south San Francisco Bay, CA generated from single-beam hydrographic surveys collected from 1858 to 2005. The DEMs were constructed based upon historical United States Coast and Geodetic Survey and National Ocean Service (NOS) surveys collected in 1858, 1898, 1931, 1956, and 1983 as well as a survey collected by Sea Surveyor, Inc. in 2005. Depth soundings from the pre-1930s surveys were manually digitized and ...

This data release provides a series of four bathymetric change grids generated from historical bathymetric surveys collected in Suisun Bay, CA from the 1866 to 1990. The National Ocean Service (NOS) and its predecessor, the United States Coast and Geodetic Survey, collected hydrographic surveys in 1866, 1886, 1923, 1941, and 1990. Surface modeling software was used to generate bathymetric DEMs of each of these surveys. The bathymetric DEMs were then adjusted to account for gridding interpolation bias and ...

This data release provides a series of five bathymetric digital elevation models (DEMs) of Suisun Bay, CA generated from single-beam hydrographic surveys collected from 1866 to 1990. The DEMs were constructed based upon historical United States Coast and Geodetic Survey and National Ocean Service (NOS) surveys collected in 1866, 1886, 1923, 1941, and 1990. Depth soundings from the pre-1930s surveys were manually digitized and georeferenced while the later surveys were obtained in digital format, and all ...

This part of the data release presents acoustic backscatter data collected on February 1, 2011, in the Sacramento River from the confluence of the Feather River to Knights Landing. The data were collected by the USGS Pacific Coastal and Marine Science Center (PCMSC) team with collaboration and funding from the U.S. Army Corp of Engineers. This project used interferometric sidescan sonar to characterize the riverbed and channel banks along a 12 mile reach of the Sacramento River, California (River Mile 79 ...

This part of the data release contains a grid of standard deviations of bathymetric soundings within each 0.5 m x 0.5 m grid cell. The bathymetry was collected on February 1, 2011, in the Sacramento River from the confluence of the Feather River to Knights Landing. The standard deviations represent one component of bathymetric uncertainty in the final digital elevation model (DEM), which is also available in this data release. The bathymetry data were collected by the USGS Pacific Coastal and Marine ...

This part of the data release presents a digital elevation model (DEM) created from bathymetry data collected on February 1, 2011, in the Sacramento River from the confluence of the Feather River to Knights Landing. The data were collected by the USGS Pacific Coastal and Marine Science Center (PCMSC) team with collaboration and funding from the U.S. Army Corps of Engineers. This project used interferometric sidescan sonar to characterize the riverbed and channel banks along a 12 mile reach of the Sacramento ...

This dataset presents 28 georeferenced orthomosaic images of the middle and lower reaches of the Elwha River. Each mosaic image was created by stitching together thousands of individual photographs that were matched based on numerous unique tie points shared by the photographs. The individual photographs were taken by a plane-mounted camera during multiple flights over the study area spanning 2012 to 2017. Because each mosaic is orthogonal to the earth's surface and is georeferenced to real-world ...

Numerically modeled ocean storm conditions of hindcast (1981-2010) and projected (2011-2100) storm events in the nearshore region of Arey Lagoon, Alaska. Storms were identified from time-series of dynamically downscaled deep-water wave conditions using WaveWatch3 (WW3) and nearshore storm surges using the Deltares Delft3D model. A storm was defined as having offshore water wave heights >= 2 meters (m) and storm surges >=0 m. The data in this file provide a listing of individual storm dates, storm duration, ...

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in April 2015. Projection = UTM, zone 10 in meters, Horizontal Datum = NAD83 (CORS96), Vertical Datum = MLLW, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in April 2015. Projection = UTM, zone 10 in meters, Horizontal Datum = NAD83 (CORS96), Vertical Datum = NAVD88, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in April 2015. Projection = UTM, zone 10 in meters, Horizontal Datum = WGS84(G1150), Elevations relative to the WGS84 Ellipsoid, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in April 2016. Projection = UTM, zone 10 in meters, Horizontal Datum = NAD83 (CORS96), Vertical Datum = MLLW, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in April 2016. Projection = UTM, zone 10 in meters, Horizontal Datum = NAD83 (CORS96), Vertical Datum = NAVD88, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in April 2016. Projection = UTM, zone 10 in meters, Horizontal Datum = WGS84(G1150), Elevations relative to the WGS84 Ellipsoid, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in April 2018. Projection = UTM, zone 10 in meters, Horizontal Datum = NAD83 (CORS96), Vertical Datum = MLLW, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in April 2018. Projection = UTM, zone 10 in meters, Horizontal Datum = NAD83 (CORS96), Vertical Datum = NAVD88, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in April 2018. Projection = UTM, zone 10 in meters, Horizontal Datum = WGS84(G1150), Elevations relative to the WGS84 Ellipsoid, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in April 2019. Projection = UTM, zone 10 in meters, Horizontal Datum = NAD83 (CORS96), Vertical Datum = MLLW, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 9.8 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in April 2019. Projection = UTM, zone 10 in meters, Horizontal Datum = NAD83 (CORS96), Vertical Datum = NAVD88, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 9.8 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in April 2019. Projection = UTM, zone 10 in meters, Horizontal Datum = WGS84(G1150), Elevations relative to the WGS84 Ellipsoid, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 9.8 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in March 2017. Projection = UTM, zone 10 in meters, Horizontal Datum = NAD83 (CORS96), Vertical Datum = MLLW, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in March 2017. Projection = UTM, zone 10 in meters, Horizontal Datum = NAD83 (CORS96), Vertical Datum = NAVD88, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in March 2017. Projection = UTM, zone 10 in meters, Horizontal Datum = WGS84(G1150), Elevations relative to the WGS84 Ellipsoid, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in October 2015. Projection = UTM, zone 10 in meters, Horizontal Datum = NAD83 (CORS96), Vertical Datum = MLLW, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in October 2015. Projection = UTM, zone 10 in meters, Horizontal Datum = NAD83 (CORS96), Vertical Datum = NAVD88, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in October 2015. Projection = UTM, zone 10 in meters, Horizontal Datum = WGS84(G1150), Elevations relative to the WGS84 Ellipsoid, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in October 2016. Projection = UTM, zone 10 in meters, Horizontal Datum = NAD83 (CORS96), Vertical Datum = MLLW, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in October 2016. Projection = UTM, zone 10 in meters, Horizontal Datum = NAD83 (CORS96), Vertical Datum = NAVD88, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the San Francisco Bay, California.

1-m resolution bathymetry collected in Coyote Creek and Alviso Slough in October 2016. Projection = UTM, zone 10 in meters, Horizontal Datum = WGS84(G1150), Elevations relative to the WGS84 Ellipsoid, all units in meters. The surveys extend east from Calaveras Point along Coyote Creek to the railroad bridge, along Alviso Slough to the town of Alviso (just over 7 km), and along the 3.7 km of Guadalupe Slough closest to the San Francisco Bay, California.

ASCII XYZ point cloud data were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area using the National Aeronautics and Space Administration (NASA) Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency laser beams directed at the ...

ASCII XYZ point cloud data were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area using the National Aeronautics and Space Administration (NASA) Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency laser beams directed at the ...

ASCII XYZ point cloud data were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area using the National Aeronautics and Space Administration (NASA) Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency laser beams directed at the ...

ASCII XYZ point cloud data were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area using the National Aeronautics and Space Administration (NASA) Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency laser beams directed at the ...

To characterize coastal change, historical maps and complementary records were compiled including: topographic sheets (T-sheets), hydrographic sheets (H-sheets, smooth sheets), shorelines, and bathymetric soundings surrounding the Mississippi (MS) barrier islands over several time periods (1916-1920, 2008-2009 and 2016). One goal of this work was to create a time-series of bathymetric change maps around the islands. Data sets include 1916 through 1920 soundings collected by the United States Coast and ...

The U.S. Geological Survey St. Petersburg Coastal and Marine Science Center (USGS-SPCMSC) and the U.S. Army Corps of Engineers Field Research Facility (USACE-FRF) of Duck, NC collaborated to gather alongshore ground-based lidar beach topography at Fire Island, NY. This high-resolution elevation dataset was collected on April 1, 2014, and is part of the USGS's ongoing beach monitoring effort under Hurricane Sandy Supplemental Project GS2-2B. This USGS Data Release includes the resulting processed elevation ...

Scientists from the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center in St. Petersburg, Florida, conducted a bathymetric survey of Fire Island, New York, from October 5 to 10, 2014. The U.S. Geological Survey is involved in a post-Hurricane Sandy effort to map and monitor the morphologic evolution of the wilderness breach, which formed in October 2012 during Hurricane Sandy, as part of the Hurricane Sandy Supplemental Project GS2-2B. During this study, bathymetry data were collected, ...

Scientists from the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center in St. Petersburg, Florida, conducted a bathymetric survey of Fire Island, New York, from October 5 to 10, 2014. The U.S. Geological Survey is involved in a post-Hurricane Sandy effort to map and monitor the morphologic evolution of the wilderness breach, which formed in October 2012 during Hurricane Sandy, as part of the Hurricane Sandy Supplemental Project GS2-2B. During this study, bathymetry data were collected, ...

The Cape Canaveral Coastal System (CCCS) is a prominent feature along the Southeast U.S. coastline and is the only large cape south of Cape Fear, North Carolina. Most of the CCCS lies within the Merritt Island National Wildlife Refuge and included in its boundaries are the Cape Canaveral Air Force Station (CCAFS), NASA’s Kennedy Space Center (KSC), and a large portion of Canaveral National Seashore. The actual promontory of the modern cape falls within the jurisdictional boundaries of the CCAFS. These ...

To characterize coastal change, historical maps and complementary records were compiled including: topographic sheets (T-sheets), hydrographic sheets (H-sheets, smooth sheets), shorelines, and bathymetric soundings surrounding the Mississippi (MS) barrier islands over several time periods (1916-1920, 2008-2009 and 2016). One goal of this work was to create a time-series of bathymetric change maps around the islands. Datasets include 1916 through 1920 soundings collected by the United States Coast and ...

To characterize coastal change, historical maps and complementary records were compiled including: topographic sheets (T-sheets), hydrographic sheets (H-sheets, smooth sheets), shorelines, and bathymetric soundings surrounding the Mississippi (MS) barrier islands over several time periods (1916-1920, 2008-2009 and 2016). One goal of this work was to create a time-series of bathymetric change maps around the islands. Data sets include 1916 through 1920 soundings collected by the United States Coast and ...

ASCII XYZ point cloud data were produced from remotely sensed, geographically referenced elevation measurements acquired cooperatively by the U.S. Geological Survey (USGS) and the National Park Service (NPS). Elevation measurements were collected over Assateague Island National Seashore using the first-generation National Aeronautics and Space Administration (NASA) Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, ...

ASCII XYZ point cloud data were produced from remotely sensed, geographically referenced elevation measurements acquired cooperatively by the U.S. Geological Survey (USGS) and the National Park Service (NPS). Elevation measurements were collected over Assateague Island National Seashore using the first-generation National Aeronautics and Space Administration (NASA) Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, ...

Coastal marshes are highly dynamic and ecologically important ecosystems that are subject to pervasive and often harmful disturbances, including shoreline erosion. Shoreline erosion can result in an overall loss of coastal marsh, particularly in estuaries with moderate- or high-wave energy. Not only can waves be important physical drivers of shoreline change they can also influence shore-proximal vertical accretion through sediment delivery. For these reasons, estimates of wave energy can provide a ...

Hydrographic sheets (H-sheets) and nautical charts produced by the National Ocean Service (NOS) during the 1800s provide historic sounding (water depth) measurements of coastal areas. The data can be vectorized into a geographic information system (GIS), adjusted to a modern vertical datum, and converted into a digital elevation model to provide an interpretation of the historic seafloor elevation. These data were produced to provide an estimate of historical bathymetry for the Mississippi-Alabama coastal ...

ASCII XYZ point cloud data were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over Dauphin Island, post-Tropical Storm Bonnie (July 2010 tropical storm), using the National Aeronautics and Space Administration (NASA) Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. ...

ASCII XYZ point cloud data were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over Dauphin Island, post-Tropical Storm Bonnie (July 2010 tropical storm), using the National Aeronautics and Space Administration (NASA) Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. ...

A geophysical survey was conducted offshore Cape Canaveral, Florida by Coastal Carolina University offshore of Cape Canaveral, Florida using high-resolution chirp sub-bottom, multibeam bathymetry and side scan sonar (SSS) systems on June 13, 14, 16, and 17 of 2016. This USGS data release includes the resulting processed elevation point data (xyz), an interpolated digital elevation model (DEM), with processed backscatter, side scan sonar, and seismic chirp data.

ASCII XYZ point-cloud data for the Chandeleur Islands in Louisiana were produced from remotely sensed, geographically referenced elevation measurements collected on September 4 and 5, 2010 by the U.S. Geological Survey. Elevation measurements were collected over the area using the first-generation Experimental Advanced Airborne Research Lidar (EAARL-A), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high ...

ASCII XYZ point-cloud data for the Chandeleur Islands in Louisiana were produced from remotely sensed, geographically referenced elevation measurements collected on February 12 and 13, 2011 by the U.S. Geological Survey. Elevation measurements were collected over the area using the first-generation Experimental Advanced Airborne Research Lidar (EAARL-A), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high ...

The U.S. Geological Survey St. Petersburg Coastal and Marine Science Center (USGS SPCMSC), collected single beam and swath bathymetry data from the northern Chandeleur Islands, Louisiana, in June of 2016. This USGS data release includes the resulting processed elevation point data (xyz) and an interpolated digital elevation model (DEM). This USGS data release provides 229-line kilometers (km) of processed single beam bathymetry (SBB) data collected under Field Activity Number (FAN) 2016-335-FA. This FAN ...

Dauphin Island, Alabama is a barrier island located in the Gulf of Mexico that supports local residence, tourism, commercial infrastructure, and the historical Fort Gaines. During the past decade the island has been impacted by several major hurricanes (Ivan, 2004; Katrina, 2005; Isaac 2012). Storms along with sea level rise, presents a continued threat to island stability. State and federal managers are taking a scientific investigative approach to identify the best options available to formulate and ...

Dauphin Island, Alabama is a barrier island located in the Gulf of Mexico that supports local residence, tourism, commercial infrastructure, and the historical Fort Gaines. During the past decade the island has been impacted by several major hurricanes (Ivan, 2004; Katrina, 2005; Isaac 2012). Storms along with sea level rise, presents a continued threat to island stability. State and federal managers are taking a scientific investigative approach to identify the best options available to formulate and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

ASCII xyz point cloud data were produced from remotely-sensed, geographically-referenced elevation measurements in cooperation with the U.S. Geological Survey (USGS) and National Air and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency laser beams ...

A first surface elevation map (also known as a Digital Elevation Model, or DEM) of the Vicksburg National Military Park in Mississippi was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), National Park Service (NPS), and National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed-laser ranging system ...

A first surface/bare earth elevation map (also known as a Digital Elevation Model, or DEM) of the Jean Lafitte National Historical Park and Preserve in Louisiana was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), the National Park Service (NPS), and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL ...

A bare earth elevation map (also known as a Digital Elevation Model, or DEM) of the Vicksburg National Military Park in Mississippi was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), National Park Service (NPS), and National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed-laser ranging system ...

A bare earth/first surface elevation map (also known as a Digital Elevation Model, or DEM) of the Fire Island National Seashore in New York was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), the National Park Service (NPS), and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed-laser ...

A first surface elevation map (also known as a Digital Elevation Model, or DSM) of a portion of the Natchez Trace Parkway in Mississippi was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), National Park Service (NPS), and National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed-laser ranging system ...

A first surface/bare earth elevation map (also known as a Digital Elevation Model, or DEM) of the Gateway National Recreation Area's Sandy Hook Unit in New Jersey was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), the National Park Service (NPS), and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar ...

A submerged topography elevation map (also known as a Digital Elevation Model, or DEM) of a portion of the U.S. Virgin Islands was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), National Aeronautics and Space Administration (NASA), and National Park Service (NPS). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed-laser ranging system mounted ...

A first surface elevation map (also known as a Digital Elevation Model, or DEM) of the northeast coastal barrier islands in New York and New Jersey was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS) and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed-laser ranging system mounted onboard ...

A bare earth elevation map (also known as a Digital Elevation Model, or DEM) of the northeast coastal barrier islands in New York and New Jersey was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS) and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed-laser ranging system mounted onboard an ...

A first surface elevation map (also known as a Digital Elevation Model, or DEM) of the northern Gulf of Mexico barrier islands and Naval Live Oaks was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), the National Park Service (NPS), and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed ...

A bare earth elevation map (also known as a Digital Elevation Model, or DEM) of the northern Gulf of Mexico barrier islands and Naval Live Oaks was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), the National Park Service (NPS), and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed-laser ...

A first surface/bare earth elevation map (also known as a Digital Elevation Model, or DEM) of the George Washington Birthplace National Monument in Virginia was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), the National Park Service (NPS), and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a ...

A first surface elevation map (also known as a Digital Elevation Model, or DEM) of a portion of St. John, U.S. Virgin Islands was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), National Aeronautics and Space Administration (NASA), and National Park Service (NPS). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed-laser ranging system mounted ...

A bare earth elevation map (also known as a Digital Elevation Model, or DEM) of the Pearl River Delta in Louisiana and Mississippi was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), the University of New Orleans (UNO), and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed-laser ranging ...

A first surface elevation map (also known as a Digital Elevation Model, or DEM) of the Pearl River Delta in Louisiana and Mississippi was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), the University of New Orleans (UNO), and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed-laser ...

A first surface elevation map was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS) and National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Airborne Topographic Mapper (ATM), a scanning Lidar system that measures high-resolution topography of the land surface. The ATM system is deployed on a twin-otter or P3 aircraft and incorporates a green-wavelength laser ...

A first surface elevation map was produced cooperatively from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS) and National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Airborne Topographic Mapper (ATM), a scanning Lidar system that measures high-resolution topography of the land surface. The ATM system is deployed on a Twin Otter or P-3 Orion aircraft and incorporates a green-wavelength ...

A first surface elevation map was produced cooperatively from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS) and National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Airborne Topographic Mapper (ATM), a scanning Lidar system that measures high-resolution topography of the land surface. The ATM system is deployed on a Twin Otter or P-3 Orion aircraft and incorporates a green-wavelength ...

A first-surface elevation map (also known as a Digital Elevation Model, or DEM) of the Assateague Island National Seashore in Virginia and Maryland was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), the National Park Service (NPS), and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed ...

A bare-earth elevation map (also known as a Digital Elevation Model, or DEM) of the Assateague Island National Seashore in Virginia and Maryland was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), the National Park Service (NPS), and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ...

A first-surface elevation map was produced cooperatively from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS) and National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Airborne Topographic Mapper (ATM), a scanning lidar system that measures high-resolution topography of the land surface. The ATM system is deployed on a Twin Otter or P-3 Orion aircraft and incorporates a green-wavelength ...

A first-surface elevation map was produced cooperatively from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS) and National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Airborne Topographic Mapper (ATM), a scanning lidar system that measures high-resolution topography of the land surface. The ATM system is deployed on a Twin Otter or P-3 Orion aircraft and incorporates a green-wavelength ...

A first-surface elevation map was produced cooperatively from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS) and National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Airborne Topographic Mapper (ATM), a scanning lidar system that measures high-resolution topography of the land surface. The ATM system is deployed on a Twin Otter or P-3 Orion aircraft and incorporates a green-wavelength ...

A first-surface elevation map was produced cooperatively from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS) and National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Airborne Topographic Mapper (ATM), a scanning lidar system that measures high-resolution topography of the land surface. The ATM system is deployed on a Twin Otter or P-3 Orion aircraft and incorporates a green-wavelength ...

A first-surface elevation map was produced cooperatively from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS) and National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Airborne Topographic Mapper (ATM), a scanning lidar system that measures high-resolution topography of the land surface. The ATM system is deployed on a Twin Otter or P-3 Orion aircraft and incorporates a green-wavelength ...

A first-surface elevation map (also known as a Digital Elevation Model, or DEM) of a portion of western Florida, post-Hurricane Charley, was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS) and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an ...

A digital elevation map (also known as a Digital Elevation Model, or DEM) of the Naval Live Oaks Area in Florida's Gulf Islands National Seashore was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), the National Park Service (NPS), and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed ...

A seamless (bare-earth and submerged) elevation map (also known as a Digital Elevation Model, or DEM) of a portion of western Florida, post-Hurricane Charley, was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS) and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system ...

A bare-earth digital elevation map (also known as a Digital Elevation Model, or DEM) of a portion of the Chandeleur Islands, Louisiana, was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS) and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft ...

A digital elevation map (also known as a Digital Elevation Model, or DEM) of a portion of the Gateway National Recreation Area in New Jersey and New York was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), the National Park Service (NPS), and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a ...

A digital elevation map (also known as a Digital Elevation Model, or DEM) of a portion of the eastern Florida coastline was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS) and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ...

A bare-earth digital elevation map (also known as a Digital Elevation Model, or DEM) of a portion of the eastern Florida coastline was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS) and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to ...

A digital elevation model (DEM) of a portion of the Mississippi and Alabama barrier islands, post-Hurricane Gustav (September 2008 hurricane), was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), the National Park Service (NPS), and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ...

A digital elevation model (DEM) of a portion of the Sandy Hook Unit of the Gateway National Recreation Area in New Jersey, post-Nor'Ida (November 2009 nor'easter) was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS) and the National Park Service (NPS). Elevation measurements were collected over the area using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to ...

A digital elevation model (DEM) of a portion of the Fire Island National Seashore in New York, post-Nor'Ida (November 2009 nor'easter), was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS) and the National Park Service (NPS). Elevation measurements were collected over the area using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, ...

A digital elevation model (DEM) of a portion of the Assateague Island National Seashore in Maryland and Virginia, post-Nor'Ida (November 2009 nor'easter), was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS) and the National Park Service (NPS). Elevation measurements were collected over the area using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ...

A digital elevation model (DEM) of a portion of the eastern Louisiana barrier islands, post-Hurricane Gustav (September 2008 hurricane), was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS) and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to ...

A digital elevation model (DEM) of a portion of the eastern Florida coastline, post-Hurricane Jeanne (September 2004 hurricane), was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS) and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ...

A digital elevation model (DEM) of a portion of the eastern Maryland and Delaware coastline, post-Nor'Ida (November 2009 nor'easter), was produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The ...

A digital elevation model (DEM) of a portion of the National Park Service Southeast Coast Network's Cape Hatteras National Seashore in North Carolina, post-Nor'Ida (November 2009 nor'easter), was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS) and the National Park Service (NPS). Elevation measurements were collected over the area using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system ...

A digital elevation model (DEM) of a portion of the Fire Island National Seashore in New York was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS), the National Park Service (NPS), and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to ...

A digital elevation model (DEM) of a portion of the Cape Hatteras National Seashore in North Carolina, post-Nor'Ida (November 2009 nor'easter), was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS) and the National Park Service (NPS). Elevation measurements were collected over the area using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground ...

A digital elevation model (DEM) of a portion of the eastern Florida coastline was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS) and the National Aeronautics and Space Administration (NASA), Kennedy Space Center, FL. Elevation measurements were collected over the area using the NASA Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, ...

A digital elevation model (DEM) of a portion of the northern North Carolina coastline beachface, post-Nor'Ida (November 2009 nor'easter), was produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The ...

A digital elevation model (DEM) of a portion of the Potato Creek watershed in Georgia was produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area on February 27, 2010, using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency ...

A digital elevation model (DEM) of a portion of the Mobile-Tensaw Delta region and Three Mile Creek in Alabama was produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area (bathymetry was irresolvable) using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. ...

A digital elevation model (DEM) of a portion of the eastern Florida coastline, post-Hurricane Jeanne (September 2004 hurricane), was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS) and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ...

A digital elevation model (DEM) of a portion of the Assateague Island National Seashore in Maryland and Virginia was produced from remotely sensed, geographically referenced elevation measurements collected cooperatively by the U.S. Geological Survey (USGS) and the National Park Service (NPS). Elevation measurements were collected over the area on March 19 and 24, 2010, using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ...

A digital elevation model (DEM) of a portion of the Virginia coastline beachface, post-Nor'Ida (November 2009 nor'easter), was produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The EAARL sensor ...

A digital elevation model (DEM) of a portion of Alligator Point, Louisiana, was produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency laser beams directed at the Earth's ...

A digital elevation model (DEM) of a portion of the Central Wetlands, Louisiana was produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area on March 4 and 5, 2010, using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency laser ...

A digital elevation model (DEM) of a portion of the north shore of Lake Pontchartrain, Louisiana, was produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area on February 28, March 1, and March 5, 2010, using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. ...

ASCII xyz and binary point-cloud data, as well as a digital elevation model (DEM) of a portion of the Louisiana coastline, post-Hurricane Rita (September 2005 hurricane), was produced from remotely sensed, geographically referenced elevation measurements cooperatively by the U.S. Geological Survey (USGS) and the National Aeronautics and Space Administration (NASA). Elevation measurements were collected over the area using the Experimental Advanced Airborne Research Lidar (EAARL), a pulsed laser ranging ...

Dune crest and toe positions along a portion of the New York, Delaware, Maryland, Virginia, and North Carolina coastlines, post-Hurricane Sandy (Sandy was an October 2012 hurricane that made landfall as an extratropical cyclone on the 29th), were produced by the U.S. Geological Survey (USGS) from remotely sensed, geographically referenced elevation measurements collected by Photo Science, Inc. (Delaware, Maryland, Virginia, and North Carolina) and Woolpert, Inc. (Fire Island, New York)using using airborne ...

Binary point-cloud data were produced for a portion of the New York, Delaware, Maryland, Virginia, and North Carolina coastlines, post-Hurricane Sandy (Sandy was an October 2012 hurricane that made landfall as an extratropical cyclone on the 29th), from remotely sensed, geographically referenced elevation measurements collected by Photo Science, Inc. (Delaware, Maryland, Virginia, and North Carolina) and Woolpert, Inc. (Fire Island, New York) using airborne lidar sensors.

Mean-high-water (MHW) shoreline for a portion of the New York, Delaware, Maryland, Virginia, and North Carolina coastlines were derived from lidar data collected following Hurricane Sandy (Sandy was an October 2012 hurricane that made landfall as an extratropical cyclone on the 29th). Data were produced by the U.S. Geological Survey (USGS) from remotely sensed, geographically-referenced elevation measurements collected by Photo Science, Inc. (Delaware, Maryland, Virginia, and North Carolina) and Woolpert, ...

ASCII xyz and binary point-cloud data, as well as a digital elevation model (DEM) of a portion of the New Jersey coastline, pre- and post-Hurricane Sandy (October 2012 hurricane), were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), a pulsed laser ranging system mounted onboard an aircraft to measure ...

American Standard Code for Information Interchange XYZ and binary point-cloud data, as well as a digital elevation model for part of Barnegat Bay, New Jersey, pre-Hurricane Sandy (October 2012 hurricane), were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar, a pulsed laser ranging system mounted onboard an aircraft to ...

American Standard Code Information Interchange XYZ and binary point-cloud data, as well as a digital elevation model for part of Barnegat Bay, New Jersey, post-Hurricane Sandy (October 2012 hurricane), were produced from remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey. Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar, a pulsed laser ranging system mounted onboard an aircraft to ...

This shapefile was produced from 52 2-kilometer by 2-kilometer tile extents of remotely sensed, geographically referenced elevation measurements by the U.S. Geological Survey (USGS). Elevation measurements were collected over the area using the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), a pulsed laser ranging system mounted onboard an aircraft to measure ground elevation, vegetation canopy, and coastal topography. The system uses high-frequency laser beams directed at the ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) in Florida and the USGS Lower Mississippi-Gulf Water Science Center (LMG WSC) in Montgomery, Alabama, collaborated to gather alongshore terrestrial-based lidar beach elevation data at Fire Island, New York. This high-resolution elevation dataset was collected on June 11, 2014, to characterize beach topography and document ongoing beach evolution and recovery, and is part of the ongoing beach monitoring within the ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center (SPCMSC) in Florida and the USGS Lower Mississippi-Gulf Water Science Center (LMG WSC) in Montgomery, Alabama, collaborated to gather alongshore terrestrial-based lidar beach elevation data at Fire Island, New York. This high-resolution elevation dataset was collected on June 11, 2014, to characterize beach topography and document ongoing beach evolution and recovery, and is part of the ongoing beach monitoring within the ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The numerical model Delft3D (developed by Deltares) was developed to evaluate the potential effects of proposed navigation channel deepening and widening in Mobile Harbor, Alabama (AL). The Delft3D model setup requires the input of a merged topographic and bathymetric elevations, a wave climate based on significant wave heights, peak wave period and mean wave direction, and a tidal-time series. The model was validated by comparing model outputs from deterministic runs with observations of water levels and ...

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center in Florida and the U.S. Army Corps of Engineers Field Research Facility in Duck, North Carolina, collaborated to gather alongshore ground-based lidar beach elevation data at Fire Island, New York. This high-resolution elevation dataset was collected on April 10, 2013, to characterize beach topography following substantial erosion that occurred during Hurricane Sandy, which made landfall on October 29, 2012, and multiple, ...

Binary point-cloud data were produced for Fire Island, New York, from remotely sensed, geographically referenced elevation measurements collected by Photo Science, Inc. using an Optech Gemini lidar sensor flown on a Cessna 206 aircraft.